Linksys WRP400 User Manual page 22

Chapter 3
Access Restrictions > Internet Access
Internet Access Policy
Access Policy Access can be managed by a policy. Use the
settings on this screen to establish an access policy (after
Save Settings is clicked). Selecting a policy from the drop-
down menu will display that policy's settings. To delete a
policy, select that policy's number and click Delete This
Policy. To view all the policies, click Summary.
Summary
The policies are listed with the following information:
No., Policy Name, Access, Days, Time of Day, and status
(Enabled). To enable a policy, select Enabled. To delete
a policy, click Delete. Click Save Settings to save your
changes, or click Cancel Changes to cancel your changes.
To return to the Internet Access Policy screen, click Close.
Wireless-G Broadband Router with 2 Phone Ports
Advanced Configuration
Summary
Status
Policies are disabled by default. To enable a policy,
select the policy number from the drop-down menu, and
select Enabled.
To create a policy, follow steps 1-11. Repeat these steps to
create additional policies, one at a time.
1. Select a number from the
menu.
2. Enter a Policy Name in the field provided.
3. To enable this policy, select
Edit List to select which computers will be
4. Click
affected by the policy. The List of PCs screen appears.
You can select a PC by MAC address or IP address. You
can also enter a range of IP addresses if you want this
policy to affect a group of computers. After making your
changes, click Save Settings to apply your changes, or
click Cancel Changes to cancel your changes. Then
click Close.
List of PCs
5. Select the appropriate option,
depending on whether you want to block or allow
Internet access for the computers you listed on the List
of PCs screen.
Access Policy drop-down
Enabled.
Deny or Allow,
21