Connect The Adapter - Cisco Linksys WUSB54G Quick Installation

Connect the Adapter

2
A
The Adapter comes with the
USB cable you will use to con-
nect the Adapter to your PC.
Connect one end of the USB
cable to the USB port of the
Adapter.
Connect the other end of the
USB cable to one of the USB
ports on your computer.
B
The Power LED should light up
when the Adapter is plugged
in.
C
Your PC will detect the Adapter
and start copying files.
D
You may see a screen that
states that the software doesn't
have the Microsoft Digital Sig-
nature. This software is tested
and works correctly with Win-
dows 2000. Click the Yes but-
ton.
E
Raise the antenna. Make sure
the antenna is positioned
straight up into the air, at a 90º
angle from the Adapter. This
will ensure optimum wireless
operating range and perfor-
mance.
4
A
D
E
For additional information or troubleshooting
help, refer to the User Guide on the CD-ROM
or the Technical Support Insert. You can also
e-mail for further support.
E-mail Support
United Kingdom and Ireland
support.uk@linksys.com
Latin America
support.la@linksys.com
Website
http://www.linksys.com/international
http://www.linksys.com/uk
Linksys is a registered trademark or trademark of Cisco
Systems, Inc. and/or its affiliates in the U.S. and certain
other countries. Copyright © 2003 Cisco Systems, Inc. All
rights reserved.
wusb54g-uk-2000-QI-31103NC KL
or