MSI Z77A-GD65 GAMING series User Manual page 58

BIOS Setup
▶ Resume By RTC Alarm
The field s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
▶ Date/ HH:MM:SS
If Resume By RTC Alarm s set to [Enabled], the system wll automatcally resume
(boot up) on a specfic date/hour/mnute/second specfied n these fields (usng the
<+> and <-> to select the date & tme settngs).
▶ Resume By PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCIe devce.
▶ Resume From S3 by USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus-
pend to RAM) sleep state.
▶ Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard
These tems determne whether the system wll be awakened from what power sav-
ng modes when nput sgnal of the PS/2 mouse/ keyboard s detected.
Boot
▶ Full Screen Logo Dsplay
Ths tem enables ths system to show the company logo on the boot-up screen.
[Enabled]
[Dsabled]
▶ Boot mode select
Ths tem determnes f the system boot from Legacy or UEFI archtecture rely on the
requrement of OS nstallaton.
== Boot Opton Prortes==
▶ 1st~9th Boot
These tems are used to prortze the nstalled boot devces.
▶ Hard Dsk Drve BBS Prortes/ CD/DVD ROM Drve BBS Prortes/ USB HardDsk
Drve BBS Prortes/ UEFI Boot Drve BBS Prortes
▶ 1st~8th Boot
These tems are used to prortze the nstalled Hard Dsk Drve/ CD/DVD ROM Drve/
USB HardDsk drves/ UEFI boot drves.
Save & Ext
▶ Dscard Changes and Ext
Use ths tem to abandon all changes and ext setup.
▶ Save Changes and Reboot
Use ths tem to save changes and reset the system.
▶ Save Changes
Use ths tem to save changes.
▶ Dscard Changes
Use ths tem to abandon all changes.
2-10
Shows a stll mage (logo) on the full screen at boot.
Shows the POST messages at boot.