Menu Button - Hitachi 50C20A Operating Manual

How to Use the Remote to Control Your TV
² INPUTS button
When the remote control is in TV mode, press this
button to access the INPUTS menu. Use the
CURSOR and SELECT buttons to scroll and select
the inputs that are being used. Pressing the
INPUTS button repeatedly will also cycle through
the Inputs menu items. Then press the SELECT
button to select.
INPUTS
Input 4
Input 5
Air / Cable
Input 1
Input 2
SEL Select
Move
INPUT 1 Select to choose INPUT 1.
INPUT 2 Select to choose INPUT 2.
INPUT 3 Select to choose INPUT 3.
INPUT 4 Select to choose INPUT 4.
INPUT 5 Select to choose INPUT 5.
AIR/ CABLE Select between Air or Cable signal.
¶ PICTURE-IN-PICTURE button
See separate section on pages 24-25 for a
description.
º MENU button
The MENU button will start the On-Screen Display.
¾ GUIDE button
[Cable Box (CBL), Satellite Receiver (SAT)
modes only]
The use of this button is only applicable when the
remote control is in (CBL) and (SAT/STB) mode.
Press this button to access the Channel Guide of
the (CBL), and (SAT/STB).
µ EXIT button
This button will exit all On-Screen Displays.
¸ CURSOR buttons/SELECT button
All the On-Screen Display features can be set or
adjusted by using the CURSOR buttons and the
SELECT button, except for numeric entries. Press
the CURSOR buttons toward desired direction and
press the SELECT button to select.
¹ INFO button
Press this button when you want to check the
channel being received, the picture source, if the
channel has stereo (ST) or second audio program
(SA), the time, CHANNEL ID and if the TIMER is set.
22
INFO button display for Analog Channels
INFO
Show Name
3:00PM- 3:30PM
ST TV-G
Auto STEREO
INFO button display for Digital Channels
INFO
Show Name
ALT U.S.
3:00PM- 3:30PM
Engl DTVCC
Auto
INFO
Show Name
ALT U.S.
3:00PM- 3:30PM
Engl DTVCC
The show description will be in this area of the screen.
Auto
INFO button display when an S-VIDEO Input is
connected to INPUT 1
INFO
Auto
INFO button display for when a COMPONENT
VIDEO: Y-P P Input is connected to INPUT 3
B R
INFO
Auto
NOTE: 1. Press the INFO button again or the EXIT
button to return to normal viewing.
2. The Aspect setting will not be shown if
the channel is locked.
Air 8
KXYZ-HD
480i 3:17PM
Cable 8 -1
KXYZ-HD
1080i 3:17PM
Cable 8 -1
KXYZ-HD
1080i 3:17PM
S-IN: 1
480i 3:17PM
Y-PBPR: 3
480i 3:17PM