Share Wifi Setting - NAD VISO 1 AP AirPlay Music System Owner's Manual

VISO 1 AP OPERATION
6 A Warning notice will pop-up. Select OK to save the new settings. "S"
will continuously flash until it turns solid green. Network connection is
successfully established with "S" turning to solid green. Your iOS device
(iPad) is now interfaced with the VISO 1 AP.
7 Return to the Wi-Fi settings of your iOS (iPad) device and ensure that it
is set to the same network setting as above (NADLAB).

SHARE WIFI SETTING

WiFi connection can also be achieved by directly connecting your iOS
device to the USB input of the VISO 1 AP. Follow below procedure for
automatic network detection and connection.
1 Using applicable Apple USB cable (not supplied), connect iOS device to
USB input of VISO 1 AP to share WiFi settings.
8
2 Press and hold "M" and "S".
3 From iOS device, select "Allow". Enter correct network username and
password when prompted. Select AirPlay
NOTE
Upon successful WiFi sharing, you can disconnect iOS device from VISO 1 AP.
AirPlay as a Source takes priority over connected iPod or iOS devices.
.