Magic Focus - Hitachi 43FWX20B Operating Manual

Projection color tv
Hide thumbs Also See for 43FWX20B:
Table of Contents

Advertisement

Magic Focus

Auto Digital Convergence Adjustment
Please turn ON your television for at least 20 minutes before using this feature.
The Magic Focus button on control panel will not work when adjustment mode is set to Manual (see page 37).
Your HITACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the
proper proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be
precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called "convergence".
Over a period of time, the picture tubes can drift out of alignment due to normal bumps and vibrations or moving the TV. If you move
your TV, or if, after a time, you notice color rings or halos around objects in the picture, you may want to converge (align) the colors.
Properly converged, the lines appear white, which is actually a combination of the outputs of the three color tubes. The output of the
green tube is stationary. The outputs of the red and blue tubes can be adjusted. When properly aligned, the outputs of all three tubes
should be directly over each other to produce the white lines.
To simplify convergence, HITACHI incorporates a function called MAGIC FOCUS located on the front control panel, which allows the
TV to self-adjust. Press this MAGIC FOCUS button and the convergence self adjustment will start and this process will take
approximately 20 seconds. If this button is pressed during this process, no change in picture quality will occur. After this 20 second
self-adjust period, picture quality will be optimum. (Do not move the TV during self-adjust.)
NOTES:
Only a momentary press of the MAGIC FOCUS button is necessary to start AUTO DIGITAL CONVERGENCE. At any
time during this convergence correction process, you may press the MAGIC FOCUS button to exit the MAGIC FOCUS
mode. However, the convergence correction process needs to be completed to SAVE the new corrected convergence
data.
You may also select Magic Focus from the VIDEO menu.
Video
Audio
Ch. Manager
Locks
Setup
MENU
Sel
Move
SEL
Video
Magic Focus
Aligns the Red, Green, and Blue
colors to correct for Magnetic
Influences.
Adjustment Mode
Auto
Manual
If you want to adjust now
Move
Return
SEL
MAGIC
FOCUS
MAGIC FOCUS
CURSOR
CURSOR
CURSOR
Start
36
Video
Picture Mode
Contrast
Brightness
Color
CURSOR
Tint
Sharpness
Vertical Position
Magic Focus
Color System
Advanced Settings
Move
Select
SEL
MAGIC FOCUS
SELECT
VIDEO
Sports
100%
50%
50%
50%

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

51gwx20b51uwx20b57uwx20b57gwx20b

Table of Contents