Table of Contents
Advertisement
Sound
This function selects the S/PDIF output format.
1. On the "Confi guration" menu page, press
select "Sound" and press the "SET" button.
2. Press
to select the S/PDIF output format and press the
"SET" button.
NOTE: When "Off" is selected, the S/PDIF output will be muted.
Information OSD
The Information OSD displays channel, signal source,
resolution and (if available) programming data on the screen
upon channel change.
1. On the "System" menu page, press
2. Select "On" or "Off" and press the "SET" button.
System Information
This function displays the software version and the network
settings.
1. On the "System" menu page, press
"System Information".
2. Press the "SET" button.
Software Update
This function is for service use only.
Reset
This function returns all OSD settings to their default settings. Password is also reset to default.
NOTE: This function is protected by a password.
1. On the "System" menu page, press
2. Enter your password. The default password is "0000". Then select "OK" and press the "SET" button.
3. Select "Yes" and press the "SET" button, then the all settings would return to the default value.
button to
button to select "Information OSD" and press the "SET" button.
button to select
button to select "Reset" and press the "SET" button.
English-11
Advertisement
Table of Contents
