NETGEAR XAU2511 User Manual page 13

Powerline Music Extender XAU2511
2. Press the Powerline Security button on the first Powerline device for 2 seconds.
• The Power LED starts blinking after you release the button.
• The Powerline device automatically creates a new, randomly generated network
encryption key that each other Powerline device on the network will use.
At this point, the other Powerline devices in your network cannot communicate with each
other.
3. Within 2 minutes of pressing the Security button on the first Powerline device, press the
Security button on the second Powerline device for 2 seconds. You need to press both
Security buttons within 2 minutes.
• The Power LED starts blinking after you release the button.
• This process allows the second Powerline device to use the same network encryption
key as the first device, so that they can communicate.
When the Power LEDs stop blinking and the Powerline LEDs are lit solid green, the two
devices should be able to communicate.
Note: This process works for only one pair of Powerline devices at a time.
If you have more than two Powerline devices, repeat this process for
each additional Powerline device to be configured.
The devices retain security settings even if they are unplugged.
Getting Started
13