Specifications; General Safety Rules; Work Area - Chicago Electric 91110 Operating Instructions Manual

Electrical Input
Electrode Sizes
Duty Cycles
Electrode Cable
Ground Clamp Cable
Overall Dimensions
Additional Features
Welding Capacity
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future refer-
ence.
When unpacking, check to make sure all the parts shown on the Parts List are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.

gENERAL SAFETY RuLES

WARNINg Read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.

WORK AREA

Keep your work area clean and
1.
well lit. Cluttered benches and dark
areas invite accidents.
SKU 91110 For technical questions, please call 1-800-444-3353.

SPECIFICATIONS

120 V~ / 60 Hz / 20 A
Power Cord: 12 Gauge With 3-Prong Plug
Thermal Overload Protection
1/16" - 3/32" (1.6mm) - (2.5mm)
35% @ 80 A
60% @ 65 A
100% @ 50 A
6 Gauge x 6' Long
6 Gauge x 5'6" Long
9-1/2" x 5-5/8" x 3-3/4"
Amber Temperature Warning Light
6 Gauge Steel
SAVE THIS MANuAL
uNPACKINg
2.
3.
Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases, or dust. Power tools create
sparks which may ignite the dust or
fumes.
Keep bystanders, children, and
visitors away while operating a
power tool. Distractions can cause
you to lose control. Protect others
in the work area from debris such as
chips and sparks. Provide barriers or
shields as needed.
Page 2