Remote Control Buttons - Hitachi VT-M282A Owner's Manual

Getting Started (Controls)

Remote Control Buttons

Illustration of remote
POWER
Turns the VCR on and off.
VCR1, TV, CATV, VCR2
Device buttons let you set the remote to control one of four devices.
MUTE (TO CONTROL TV)
Turns off the audio until you press Mute again.
VOLUME/SLOW
Increase or decrease the audio volume and plays back in adjustable slow motion.
REW
Rewinds the videotape.
PLAY
Starts playing a loaded videocassette.
STOP
Stops a videocassette from playing, recording, pausing, rewinding - or anything it is doing.
GUIDE
Brings up an on-screen setup and programming guide, the Easy Graphic Menu.
TAPE SPEED
Switches between standard play (SP) and extended play (EP).
AVX
Used for recording from an auxiliary input such as a stereo system.
INDEX
Used for marking and searching for specific tape locations.
LAST CHANNEL (TO CONTROL TV)
Switches to the channel you watched previously during the current viewing session.
CHANNEL
Top button switches to the next higher channel, bottom button switches to the next lower channel. For
these to operate, you must have preset your channels.
REC
Starts recording on the station the VCR is set to. (Press REC and PLAY at the same time.)
F.FWD
Fast forwards the videotape.
PAUSE
Temporarily stops the cassette from recording or playing. Press PAUSE again (or PLAY) to resume.
F.ADV
Lets you advance the tape frame by frame.
CLEAR
18