Advertisement
Chapter 2: Install the USB PC Camera utility
software
1. Plug the camera into a spare USB port on your
computer. The software should be detected and
load automatically.
Click "Next" button to start installing.
2. In this part, please read the agreement and
print a copy if required. Hit next where you
will see the installation guide, reminding you
to select the path where the software will be
installed. Click "Browse" to change the path,
and then click "Next" to the next step. If you
do not wish to change the installation path,
click "Next".
3. Please click "Install" button to start installing
the software.
Advertisement
