Table of Contents
Advertisement
12
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
1
Press the desired button on the bottom of the Monitor.
2
Change the value of the menu item by pressing the buttons on the bottom of the Monitor.
To return to the upper menu or set other menu items, use the up arrow (
3
Select EXIT to leave the OSD menu.
MENU
Button
MENU
SES /
MODE /
AUTO
INPUT / EXIT
(Power Button)
NOTE
All of the buttons are touch sensitive and can be operated by simply touching their label with your
finger.
SES
MODE
AUTO
Accesses the main menus.
OSD LOCKED/
This function allows you to lock the current control settings,
UNLOCKED
so that they cannot be inadvertently changed.
y Press and hold the Menu button for a few seconds. Then,
y You can unlock the OSD controls at any time by pushing
Enables the SUPER ENERGY SAVING function.
Goes to the Picture Mode menu.
When adjusting your display settings, always press the AUTO button. (Only supported in
Analog Mode)
The best display mode
1920 x 1080
You can choose the input signal.
• When two input signals are connected, you can select the input signal (D-SUB/
HDMI1/HDMI2) you want.
• When only one signal is connected, it is automatically detected. The default setting is
D-SUB.
EXIT
Exit the OSD (On Screen Display).
Turns the power on or off.
Power Indicator
When the monitor is in operating mode, the power indicator
will turn red (on mode).
When the monitor is in power-saving mode, the power indica-
tor will blink red.
) button.
INPUT
EXIT
Monitor set Buttons
Description
you will be prompted to set the OSD Lock.
the MENU button for several seconds. The message "OSD
UNLOCKED" should appear.
Advertisement
Table of Contents
