Summary of Contents for iHome iDM9
- Page 1 Model: iDM9 Rechargeable Handsfree Speakerphone Questions? Visit www.ihomeaudio.com...
-
Page 2: Table Of Contents
Introduction Thank you for purchasing this unit. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide,this instruction booklet explains the basic operation and care of the unit. - Page 3 FCC Information FCC ID:EMOIDM9 IC:986B-IDM9 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- Page 4 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information.
-
Page 5: Meet Your Unit
Meet Your Unit Included • iDM9 system (1 speaker) • 24 inch micro USB charging cable • 12V Car charger Travel Lock: a. Move the Travel Lock/Aux/Bluetooth switch on the back of the speaker to the position to temporarily disable the unit and prevent accidental button activation during travel that might drain the battery. - Page 6 Meet Your Unit Top/Front of Speaker Power Button/Ignore Call/ Bluetooth/Answer call Power/Charging Indicator Light (Speakerphone)/ Play/Pause Button/Bluetooth Volume Down Button Indicator Light Volume Up Button Built-in microphone Rear of Speaker Travel Lock/Aux/ Micro USB Bluetooth Switch Charging Port Aux Line-in jack...
-
Page 7: Charging The Unit
Step 3 USB plug to it and connect the micro end Car’s to the iDM9. Cigarette 4. The Button light flashes white while the Lighter unit is charging and glows steadily white once unit is fully charged. -
Page 8: Using Bluetooth:pairing Your Device
The Button will flash while the unit attempts to pair. 5. “iDM9” should appear in your device’s list of Bluetooth devices; its status display may indicate “not paired” or “not connected”. Select iDM9 to connect. If your device asks for a password, enter 1234 on the keyboard of your device. -
Page 9: Playing Audio Via Bluetooth
Playing Audio Via Bluetooth 1. Move the Travel Lock/Aux/Bluetooth Switch to the Bluetooth position to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device. 2. Press and hold the Button to turn on the unit. The bluetooth button light will flash as the unit searches for a previously paired device, and then turn solid when a previously paired device is detected. -
Page 10: Playing Audio Via Aux/ Troubleshooting
Unit doesn’t respond (no power) • Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iDM9. • Make sure the Travel Lock/Aux/Bluetooth Switch is not in the position, as this will disable operation. -
Page 11: Consumer Product Safety Guide
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. - Page 12 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 (one) year from the date of original purchase.
Need help?
Do you have a question about the iDM9 and is the answer not in the manual?
Questions and answers