Maintenance and Diagnosis
bit
BIT0=1
BIT1, 2
BIT3=1
BIT5=1
Any of these
BIT6=0
cases.
BIT7=1
Table 7.2 Disposition for Error Field contents
Error bit
BIT0
BIT1
Any of these
bits are "1".
BIT4
BIT6
BIT4=1 and BIT2=1
or
BIT3=1 and BIT2=1
or
BIT2
Any of these
bits are "1".
BIT7
7-10
Table 7.1 Status Field contents
Shown in Table 7.2
It is not necessary to take any measure when other bits are
normal, in spite of these bits. (Normal)
(1) Check whether vibration is transmitted because of the way
the disk drive is mounted.
(2) Check the power, cable, and connector.
(3) If it is concluded that the disk drive is the cause, replace the
disk drive.
Method of disposition
If it is concluded that the disk drive is the cause, replace the
drive.
(1) Check the status of the host system, cable, and drive.
(2) If it is concluded that the disk drive is the cause,
replace the drive.
Contents
C141-E269