20
Operating
Sleep Timer Setting
Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After delay time, the
unit will turn off. (You can see the following order,
180 -> 150 ->120 -> 90 -> 80 -> 70 -> 60 -> 50 ->
40 -> 30 -> 20 -> 10)
To cancel the sleep function, press SLEEP
repeatedly until the display window get bright.
,
Note
y Press SLEEP. The remaining time appears in
the display window.
y Sleep function will work after dimmer
function.
3
Dimmer
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until the display window get bright.
CM2630-BR_DGBRLLK_ENG_6405.indd 20
Advanced Operation
Recording on USB
1. Connect the USB device to the unit.
2. Select a function by pressing FUNCTION or
FUNC.
One track/file recording - You can record a track/
a file on USB while playing the file you want.
All tracks/files recording - You can record tracks/
files on USB in stop state.
Program list recording - After making program
list, you can record it on USB.
(Refer to the page 15)
3. Start the recording by pressing USB REC on the
remote control.
4. To stop recording, press ZENTER.
Pausing recording
During recording, press USB REC to pause
recording. Press it again to restart recording. (Only
Radio/ Portable function)
To select recording bit rate
and speed
1. Press USB REC for longer than 3 seconds.
2. Use C/V to select the bit rate.
3. Press USB REC again to select the recording
speed.
4. Press C/V to select a desired recording
speed. (CD Function Only)
X1 SPEED
- You can listen to music while recording it.
(Audio CD Only)
X2 SPEED
- You can just record the music file.
5. Press USB REC to finish the setting.
2013-03-21
6:28:52