Using The Stylus Pen; How To Use Stylus Pen - HitachiSoft StarBoard BT-2G User Manual

BT-2G
StarBoard
- USB mode
Condition
Power on
USB cable plugged
Connecting
Pen tip on active
area of the tablet
Pen within active
area (not touched)
Low battery
.

2.2 Using the Stylus Pen

This section describes how to use the StarBoard stylus pen.

2.2.1 How to use Stylus Pen

The stylus pen has a ON/OFF switch. Battery life can be prolonged by ON/OFF the
switch. To use the stylus pen, set the power switch of the stylus pen to the ON position.
ON/OFF switch
3. The blue LED will blink continuously during connecting to PC.
4. The blue LED will be solid when the pen is detected within active area.
1. When USB cable is initially connected to the tablet, the red LED will
flash once and the blue LED will blink continuously.
2. The blue LED will be solid when the pen is detected within active area.
Bluetooth Mode
Blue LED
Flash once
Blink
continuously
Off
Solid
Off
USB Mode
Red LED Blue LED
Flash once
Blink
continuously
Off Blink
continuously
Off Off
Off Solid
Solid
2-3
Usage Procedures
Red LED
Flash once
Off
Off
Off
English