Connecting To A Virtual Private Network (Vpn) - HTC Flyer User Manual

153 Internet connections
Checking the wireless network status
1. From the Home screen, tap
2. Tap Wireless & networks > Wi-Fi settings.
3. Tap the wireless network that HTC Flyer is currently connected to.
A message box is then displayed showing the Wi-Fi network name, status, speed,
signal strength, and more.
If you want to remove the settings for this network, tap Forget. If you want to
reconnect to a wireless network that you have removed, you'll need to choose the
wireless network from the list of available Wi-Fi networks again. If it is a secured
wireless network, you'll need to enter the wireless network credentials again.
Connecting to another Wi-Fi network
1. From the Home screen, tap
2. Tap Wireless & networks > Wi-Fi settings. Detected Wi-Fi networks are
displayed in the Wi-Fi networks section.
3. To manually scan for available Wi-Fi networks, tap
4. Tap another Wi-Fi network to connect to it.
Setting when to disconnect from a Wi-Fi network
1. From the Home screen, tap
2. Tap Wireless & networks > Wi-Fi settings.
3. Tap Wi-Fi disconnect policy, and then choose the policy you want.

Connecting to a virtual private network (VPN)

Add, set up, and manage virtual private networks (VPNs) so you can connect and
access resources inside a secured local network, such as your corporate network.
Depending on the type of VPN you're using at work, you may be asked to enter your
login credentials and install security certificates before you can connect to your
company's local network. You can get this information from your network
administrator.
Also, HTC Flyer must first establish a Wi-Fi connection before you can start a VPN
connection.
> Settings.
> Settings.
> Settings.
> Scan.