Remove the WLAN module:
1.
Position the computer with the front toward you.
NOTE:
white WLAN antenna cable is connected to the WLAN module "Aux" terminal.
2.
Loosen the two Phillips PM2.0×6.0 captive screws (1) that secure the wireless module
compartment cover to the computer.
3.
Lift the rear edge of the cover (2) to detach it from the computer.
4.
Remove the wireless module compartment cover (3). The wireless module compartment cover is
included in the Plastics Kit, spare part numbers 613343-001 (for use only on computer models
equipped with a 14.0-in display assembly) and 613344-001 (for use only on computer models
equipped with a 15.6-in display assembly).
5.
Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
white WLAN antenna cable is connected to the WLAN module "Aux" terminal. If the computer is
equipped with an 802.11a/g/n WLAN module, the yellow WLAN antenna cable is connected to
the middle terminal on the WLAN module.
6.
Remove the two Phillips PM2.5×6.0 screws (2) that secure the WLAN module to the system
board. (The WLAN module tilts up.)
90
Chapter 4 Removal and replacement procedures
The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The
The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The