Vauxhall KTA-2683/6-VX-en Owner's Manual page 156

7. Screw the sealant filler hose to the
tyre valve.
8. The rocker switch on the
compressor must be set to
position O.
9. Connect the red < power supply
lead on the compressor to the
jump start terminal 3 160.
10. Connect the black ] power
supply lead to a vehicle grounding
point, e.g. the engine block or an
engine mounting bolt.
To avoid discharging the battery,
we recommend running the
engine.
Vehicle care
11. Set the rocker switch on the
compressor to position I. The tyre
is filled with sealant.
12. The compressor pressure gauge
briefly indicates up to 6 bar. Then
the pressure starts to drop.
13. All of the sealant is pumped into
the tyre. Then the tyre is inflated.
155