Dell 2408WFP User Manual page 20

Or
Main Menu for non Analog (non VGA) Input
NOTE: AUTO ADJUST is only available when you are using the analog (VGA) connector.
2. Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table
for a
complete list of all the options available for the monitor.
3. Push the MENU button once to activate the highlighted option.
4. Push and button to select the desired parameter.
5. Push MENU to enter the slide bar and then use the
6. Select the "back" option to return to the main menu or "exit" to exit the OSD menu.
Icon Menu and
Submenus
EXIT
BRIGHTNESS
& CONTRAST
Back
Brightness
Contrast
Exit Menu
AUTO ADJUST
INPUT
SOURCE
and
Description
Select to exit the main menu.
This menu is to activate Brightness/Contrast adjustment.
Push to go back to the main menu.
Brightness adjusts the luminance of the backlight.
Push the button to increase brightness and push the
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the button to increase contrast and push the
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Push to exit the OSD main menu.
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your partic
setup.
NOTE: In most cases, Auto Adjust produces the best image for your configuration.
NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
The INPUT SOURCE menu is to select between different video signals that may be connected to your monitor.
buttons, according to the indicators on the menu, to make your changes.
button to decrease brightness (min 0 ~ max 100).
button to decrease contrast (min 0 ~ max 100).