Page 2
Once you’re registered, we can keep you informed of important product information. Register at www.clarion.com - it’s easy to keep your Clarion product up to date. INFORMATIONS DE L’ENREGISTREMENT DE PRODUITS CLARION Pour les Étas Unis et le Canada seulement www.clarion.com...
Due to the complexity of the vehicle's wiring and components, it is recommended an authorized Clarion dealer perform the installation. For the location of nearest authorized Clarion dealer, please visit: www.clarion.com For your safety, this manual should be read thoroughly to familiarize yourself with controls and functionality.
Page 4
• If exhaust fumes or water penetrates into the vehicle, this may cause an accident. • Fasten the bolts securely when installing the unit. Loose bolts create the risk of an accident or malfunction. NK1U...
Dashboard to 5 N⋅m (Approximately 0.4 kgf⋅m to 0.5 kgf⋅m) as a general guide. Note: You can adjust the tilt angle of the Car Dock within a range of 10 degrees forward, 25 degrees back, and 5 degrees horizontally. NK1U...
• Use a dry cloth to wipe the installation location free of dust and oil. • It takes about 24 hours for the adhesive tape to achieve full adhesion. 3. Connect the RDS-TMS antenna to the RDS- TMC input terminal on the Car Dock (see Wire Connection (P. 8).). NK1U...
Yellow Main power cord Connect to an uninterrupted power supply. Car Dock I/F BOX Audio cable Connection cable Vehicle audio 6 RDS-TMC antenna Use the 3 cord holders to system's AUX in secure the connection cable. NK1U...
ClarionMiND for charging while the ClarionMiND is Navigation will start up automatically and the attached to the Car Dock. Car mode Home screen will appear. For details about the Car mode and Navigation, ClarionMiND see the ClarionMiND Owner's manual. Hook Car Dock Hook NK1U...
3. Tap the [Sound] key. 3. Tap the “Mode select by” [Car Illumi.] key. 4. Next to “Sound from car speaker using “Car Dock””, tap the [ON] key. 4. Tap to apply the setting. 5. Tap to apply the setting. NK1U...
Also, with some vehicle audio systems, audio output during playback may not be possible and navigation guidance also may be muted (no output). If this happens, change the “Voice command via docking station” setting in step 5 to [OFF]. NK1U...