Behringer Eurolive B315A Brochure & Specs

Professional Powered Speakers
EUROLIVE
B315A/B312A
EUROLIVE — Processor-Controlled
400-Watt 2-Way PA Speaker System
with 15"/12"Woofer and 1.75" Titanium
Compression Driver
High-power 400-Watt 2-way PA
sound reinforcement speaker system
for live and playback applications
Ultra-compact lightweight system
delivers excellent sound even at
extreme sound pressure levels
Integrated sound processor for
ultimate system control and
speaker protection
Extremely powerful 12"/15" long-
excursion driver provides incredibly
deep bass and acoustic power
State-of-the-art 1.75"
titanium-diaphragm compression
driver for exceptional
high-frequency reproduction
Ultra-wide dispersion and large
format exponential/conical horn with
multi-cell aperture throat
Ultra-low noise Mic/Line input with
Volume control and Clip LED
Dedicated 2-band EQ for perfect
sound adjustment
Additional Line output allows linking
of additional speaker systems
Versatile trapezoidal enclosure design
allows different positioning:
• Stand mounting with
35-mm pole socket
• Tilts on its side for use as a
floor monitor
Ergonomically shaped handles for
easy carrying and setup
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
Finally, active loudspeakers that sound
as good at the gig as they did in the store!
In a world where PA systems are
typically huge, heavy and expensive,
the EUROLIVE B312A and B315A
loudspeaker systems stand head
and shoulders above the crowd.
Thanks to its high-efficiency design,
the B315A cranks four hundred of
the cleanest, punchiest audio Watts
you've ever heard from a compact
loudspeaker system. The integrated
sound processor provides total system
control, along with dependable
protection of the LF transducer and 1.75"
titanium-diaphragm compression driver.
In addition, the both models features an
Ultra-Low Noise (ULN) Mic/Line input with
LEVEL control and a dedicated 2-band EQ
(bass/treble tone control) for easy control.
And both the B312A and the B315A are
extremely affordable!
No need for racks of amps and external
processing gear
Without a doubt, one of the coolest
things about powered loudspeakers
is the lack of back-breaking racks of
amps, crossovers and EQs that are often
required to make passive speaker systems
sound good.
Hiding inside each B312A/B315A
enclosure is the equivalent of a 2-way
electronic crossover, a graphic equalizer,
a parametric equalizer, a mic preamp
and two power amplifiers! They all work
together and don't need adjustments or a
degree in sound engineering.
And more about those power
amplifiers. They're perfectly matched to
the loudspeaker's woofer and tweeter...
so there's no risk of either over- or
under-powering your speakers, which can
lead to catastrophic failure of the entire
system. Since all the electronics onboard
have been designed and optimized to
work as a total, high-performance system,
you never have to worry.
Continued on next page