Assembling Your Stove-Top Popper; Using Your Stove-Top Popper; How To Use - Back to Basics STOVE-TOP POPCORN POPPER Instruction Manual

A
Before using your stove-
top popper and after
each use, wash all parts
in warm, soapy water,
rinse thoroughly and
dry. To prolong the life
of your stove-top
popper, do not wash
parts in the
dishwasher.
1. Hold the lid by the main handle and place the lid peg in the hole of the popper
pan.
2. Line up the clamp under the main handle between the two dimples on the pan
rim.
3. Press down on the main handle until the lid locks in place.
4. Attach the lid clamp to the pan by pressing down on the wood lid knob.
Heat The Stove:
•
For an electric range, set the burner to medium high.
•
For a gas range, set the burner to medium.
•
For flat-top ranges, set the burner to medium low.
Note: Because stove top heat output varies, adjust the temperature as needed so
popping is completed about three minutes after the popcorn is added to the pan.
Flat-top ranges cook hotter than standard ranges, pay close attention to the popping.
Like most pans, the Stove-Top popper will rock when used on a flat-top range.
Popping Popcorn:
Tip: Use fresh popcorn. Old popcorn loses its moisture and won't pop well.
1. Place 1-3 tablespoons of oil and ½ cup popcorn in the popper and place on the
stove top. Note: Don't use butter, margarine, shortening or lard in place of oil,
as these will burn or smoke excessively.
2. Slowly and continuously, turn the handle.
3. The popping cycle will be complete in approximately three minutes. When you
no longer hear vigorous popping and stirring becomes difficult, remove from
heat. Carefully empty the popcorn into a serving bowl from the left side lid. Use
a hot pad if you find it necessary to open the lid when emptying.
Y
SSEMBLING OUR
U Y
SING OUR
S -T
TOVE OP
S -T P
TOVE OP
3
P
OPPER
OPPER