Playing Back Your Recording On Your Tv; Connecting To A Television With A Vcr Attached; Connecting To A Television With Audio In And Video In Jacks - Hitachi VM-H725LA Instruction Manual

Basic Techniques
Note: When you engage F.F button or REW button the picture will have some interference or noise. This is
normal during search mode.

Playing Back Your Recording on Your TV

Depending on the setup of your video equipment, you connect the camcorder in one of the 3 methods explained
below.

Connecting to a Television with a VCR Attached

1. Connect the provided AV stereo output cable to the AUDIO IN and VIDEO IN jacks of your VCR. Connect
either the right or left audio plug into your VCR if it has only one AUDIO IN jack.
Note: Some VCRs have an S-VIDEO IN jack. Connect the black S-VIDEO plug to the VCR instead of the
yellow VIDEO plug.
Note: If you use a generally available audio/video cable in place of the AV stereo output cable (provided) with
the connection shown above, unplug the AV stereo output cable from the AV IN/OUT jack of the camcorder.
2. Connect the free square plug to the AV IN/OUT jack of the camcorder.
3. Insert a previously recorded cassette into the camcorder.
4. Turn on your VCR and place it in the camcorder input mode (consult your VCR manual for details). Operate the
television as you normally do to see the signal coming from the VCR.
5. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to VIDEO.
6. Press the PLAY button to begin playback.
7. Press the STOP button when finished.

Connecting to a Television with Audio In and Video In Jacks

- 29 -