Download
Share
Print this page
  1. Manuals
  2. Brands
  3. SPORTSPOWER Manuals
  4. Outdoor Furnishing
  5. WP-336R
  6. Owner's manual

SPORTSPOWER WP-336R Owner's Manual

Woodland play set
Hide thumbs

Advertisement

Quick Links

Download this manual
WOODLAND
PLAY SET
MODEL # WP-336R
OWNER'S MANUAL
ASSEMBLY
INSTRUCTION
CARE MAINTENANCE
AND USER'S GUIDE
FOR RESIDENTIAL
USE ONLY
This product
is intended
for use by children
from ages 3 to 8.
CAUTION
This unit is designed
for the use of 8 occupants,
with a maximum
weight
of
100 pounds
(45.4kgs) for each. Combined
weight
is not to exceed 800
pounds
(363.2kgs).
Assembly
requires
at least FOUR adults.
PLEASE RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE. KEEP THEM IN A SAFE PLACE
WHERE YOU CAN REFER TO THEM AS NEEDED.
Customer
Service
Do not return to the store,
For customer
service,
please visit wwwos
owerltdonet
SPORTSPOWER LTD
FLAT M, 3/FLOOR, KAISER ESTATE PHASE 3,
11 HOK YUEN STREET, HUNGHOM,
KOWLOON, HK

Advertisement

loading
Need help?

Need help?

Do you have a question about the WP-336R and is the answer not in the manual?

Questions and answers

Summary of Contents for SPORTSPOWER WP-336R

  • Page 1 WOODLAND PLAY SET MODEL # WP-336R OWNER'S MANUAL ASSEMBLY INSTRUCTION CARE MAINTENANCE AND USER'S GUIDE FOR RESIDENTIAL USE ONLY This product is intended for use by children from ages 3 to 8. CAUTION This unit is designed for the use of 8 occupants,...
  • Page 2 Dear Valued Customer, Congratulations on your Wood Play Set purchase! To assure the safety of your children while they enjoy many great moments of outdoor fun, please assure you thoroughly read and follow this important manual. It contains specific safety instructions that will assure a safe play experience.
  • Page 3 o Finda locationwhere the equipmentcan be placedmorethan 6 feetfromany structureor obstruction(ex:electricalwires,branches,house,fence,garage)The safe playarearefersto a zoneextending6' beyondthe gym set on all sides,includingthe spaceabovethe gym set. o The safe playarea mustbe free of all structures,landscaping, t ressandbranches,rocks,wires andother obstaclesto safe play. Childrencan beseriouslyinjuredrunningor swinginginto theseobstacles.
  • Page 4 What to Inspect: Hardware: Inspect all nuts and bolts and tighten if required. Hardware should be firmly against, but not crushing wood. Over-tightening hardware crushes wood fibers and can split wooden components resulting in the bolt thread extending beyond the wood. This poses a severe safety hazard. If bolt threads protrude beyond...
  • Page 5 • CHECK METAL PARTS FORRUST.IFFOUND, SAND ANDREPAINT USING ANONLEAD-BASED PAINT MEETING THEREQUIREMENTS OF 16CFR1303. • CHECK ALLWOOD MEMBERS FORDETERIORATION ANDSPLINTERS. SANDDOWN SPLINTERS A ND REPLACE DETERIORATING WOOD MEMBERS. • REINSTALL ANYPLASTIC PARTS, S UCH ASSWING SEATS ORANYOTHER ITEMS THATWERE REMOVED FORTHECOLD SEASON.
  • Page 6 WARNING • Lawn swings is designed for use by children over two years of age. Use by Children under the age of two can result in entrapment between the seat and back areas. NEVER place children in rearward facing position or with legs between the seat and backrest because the child's body may pass through...
  • Page 7 • If the swingset is set up ongroundswith sandysoilcondition,it mustbeanchoredwithconcretefooting (Concretenot included). On-siteadultsupervision for childrenof all agesis recommended. • Instructchildrennot to walkcloseto, in frontof, behind,or betweenmovingitems. • Instructchildrennot to twistswing chainsor ropesor loopthem overthe top supportbar sincethis may reducethe strengthof the chain or rope. •...
  • Page 8 trampolinemustnot be usedin gusty or severewinds. • Neveruse the trampolinewithoutattachingthe frame paddingproperlysecureto the frame andin correct position prior to each using of trampoline. • Adequate overhead clearance is essential. A minimum of 24 ft from ground level is recommended. Provide clearance for wires, tree limbs, and other possible hazards.
  • Page 9 TIGHTENING NUTS& BOLTS • At the startof assembling, d o not tightenbolt/nutall the way, so to allowsome possibleadjustment, f or easeof installation. • Afterall majorcomponentsare assembled, g o backto lookover all boltsand nutsand screwsproperly tightenall of them beforeusingthis product. WARNING ON-SITE ADULT SUPERVISION IS REQUIRED AT ALL TIMES FOR CHILDREN...
  • Page 10 IMPORTANT CONSUMER INFORMATION SHEET The Consumer Product Safety Commission estimates that about 100,000 Playground equipments. Related injuries resulting from falls to the ground equipment treated annually In U.S. hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head.
  • Page 11 Tools Required for Assembly_ These are the tools that are generally required for installation. These tools are not included in the purchased packaging unless stated below. Electric Drill Drill Attachments: Phillips Head Screw 3/8" Socket Driver Ladder or Step Tool Torque Head Screw Phillips &...
  • Page 12 DiAGP_M REF# ° ..l--* ................÷..........I_ ...................._............. _..÷ A..J- ÷ I° I ÷ ÷ t N10A NIOB [_................................ N 16 N 17 N 18 iNIgA N19'8 ["...
  • Page 13 LC_ ..-iii _ ZZZZZZZZZZZZZZ ZZZZZ !!
  • Page 14 REF# DiAGP_M ,,,..[" ..............147A f° & n47B...
  • Page 15 Z6 - 66pcs Z5 - 6pcs Z4 - 86pcs Z3 - 8pcs Z2 - 50pcs Zl - 26pcs M4 x 35ram M4 x 28mm M8 x 135mm M6 x 75mm M6 x 50mm MSx58mm Z12- 15pcs - 8pcs ZlO - 4pcs Z9 - 4pcs Z8 - 14pcs Z7 - 12pcs...
  • Page 16 Z19- 8pcs Z21- 2pcs Z22- 2pcs Z23 - 2pcs Z24- 2pcs Z25 -4pcs M8 x 60mm M8 x40mm M5 x 12mm M6 x 35mm M4 x 19mm 1/4" x 34ram 90pcs 72pcs V3 - 124pcs 50pcs 14pcs 22pcs M8.5 V13 - 6pcs VIO - 2pcs 5/16"...
  • Page 17 U4 x 7pcs lJ_ × _2nc_ U2 x 2pcs U1 x 1pc _lpc U7 x lpc U6 x 2pcs Ul0 x 1pc U9 x lpc x 1pc U5 x 2pcs U14 x 1pc U12 x 1pc U13 x 1pc U15 x 1pc U12A x 1pc U17 x 28pcs U16 x 1pc...
  • Page 18 U24x 2pcs U22x 1pc U28 x 2pcs U26x 2pcs U27 x 2pcs U29 x 2pcs U31 x 2pcs U25 x 2pcs U23 x 2pcs M_-M_S IPC...
  • Page 19 Hardware Pre-assemble Wood boards needed: Hardware needed: *1pc *1pc *1pc *1pc *50pcs *1pc *1pc *1pc *2pcs *14pcs * 2pcs N40 * 7pcs * 1pc * 2pcs Take all the wood boards needed in this step and lay on the ground. Nail down the Square Head Rivet (V4 &...
  • Page 20 ® ® ® ® N35 x 2pcs N40 x 1pc (only attach to one N40) N40 x 1pc (only attach to one N40) ® ® N45 x 1pc ® N50 x 2pcs V5 -Small Square Head Rivet drive in the small square head rivet into the pre-dritled hole ®...
  • Page 21 STEP Wood boards needed: Hardware needed: *1pc *1pc *16pcs *1pc *1pc *16pcs *16pcsV3 *1pc *1pc *1pc *1pc *1pc Insert Ulto the middle portion of N3 and N4 as shown in FIGURE 1. Then, assemble N3 and N4 with N8 by using Z2, V3 and V2. Attach N7Ato N3 and N4 by using Z2, V3 and V2 as...
  • Page 22 STEP 2 Wood boards needed: Hardware needed: * 2 pcs N10A *lpcs N10B *16pcs *16pcs * 1 pc * 16 pcs Combine one side of the two side frames assembled in STEP 1 by N10A and Nll using Z1, V1 and V3 as shown in FIGURE 4 and 5.
  • Page 23 STEP 3 Wood boards needed: Hardware needed: *1pc "1 pc * 4 pcs * 2 pcs * 6 pcs * 6pcs Attach N12 to N3 and N4 by using Z2, V3 and V2 as shown in FIGURE 8. Attach N13 to N12 and N9 by using Z3, V3 and V2 as shown in FIGURE 9. Z2, V3, V2 FIGURE 8 Z_,V3,...
  • Page 24 STEP 4 Wood boards needed: Hardware needed: *1pc "1 pc * 37 pcs *7pcs *2pcs Attach N14to N8, N12, N10B and Nll using Z4 as shown in FIGURE 10. Attach N15 to N9, N13, N10B and Nll using Z4 as shown in FIGURE 11. Attach N16 to N13, N10B and Nll using Z4 as shown in FIGURE 12.
  • Page 25 STEP 5 Wood boards needed: Hardware needed: *1pc *1pc *2pcs *10pcs * 12 pcs *1pc N19A *1pc N19B *2pcs *10pcs * 12 pcs *2pcs *1pc N22A *1pc N22B *22pcs Insert N5 to the gap on N17 and connect with Nil by using Z1, Vl and V3 as shown in FIGURE 14 and the Enlarged diagram.
  • Page 26 Attach N6 to N19A by using Zl, Vland V3 as shown in FIGURE 17. Then, attach N20 to N6 and N4 by using Z1, Vl and V3 as shown in FIGURE 17. Attach N20 to N3 and N5 by using Z1, Vl and V3 as shown in FIGURE 18. Then, attach N21to N3 and...
  • Page 27 STEP 6 Wood boards needed: Hardware needed: 15pcs _30pcs _4pcs 4 pcs _ 2 pcs Attach 7pcs N23 to N18 from the interior by using Z4 as shown in FIGURE 20 and the Enlarged Diagram. Then, attach 6pcs N23 to N19A and N19B from the interior by using Z4 as shown in FIGURE 20.
  • Page 28 STEP 7 Wood boards needed: Hardware needed: * 1 pc * 4 pcs * 4 pcs * 4 pcs Attach N24to N1 and N2 by using Z5, Vl and V3 as shown in FIGURE 22. Z5, Vl, V3 FIGURE 22...
  • Page 29 STEP 8 Wood boards needed: Hardware needed: *2pcs *1pc * 10 pcs * 2 pcs Attach N25 to the midpoint of N22A/N22B by using Z6 as shown in FIGURE 23. Attach N26 to N25 by using Z6 as shown in FIGURE 24 and the Enlarged Diagram. Attach N27 to the two end of N22A/N22B by using Z6 as shown in FIGURE 25.
  • Page 30 STEP 9 Wood boards needed: Hardware needed: *1pc *1pc * 4 pcs * 16 pcs *4pcs *2pcs Attach N28 to N5 and N6 by using Z6 as shown in FIGURE 26. Attach N29 to N3 and N4 by usinp_ Z6 as shown in FIGURE 27. FIGURE 27 FIGURE 26 Attach...
  • Page 31 STEP 10 Wood boards needed: Hardware needed: *1pc N32A *1pc N32B *4pcs *11pcs *3pcs *4pcs *8pcs *2pcs *2pcs *8pcs *4pcs *1pc *2pcs *12pcs Attach N33 to 3pcs N34 by using Z4 as shown in FIGURE 30 to make the "Table". Attach N36 to N35 by using Z7, Vland V3 as shown in FIGURE 31 to make the "Seat support".
  • Page 32 Attach N32Ato N4, N32B to N2 by using Z2, V3 and V2 as shown in FIGURE 33. Attach "Table" (together with N33 and N34) to N32A and N32B by using Z4 as shown in FIGURE 34. Attach "Seat Support" (together with N35 and N36) to N7A and N7B by using Z7, Vl and V3 as shown in FIGURE 35.
  • Page 33 STEP 11 Wood boards needed: Hardware needed: *2pcs *2pcs *4pcs *2pcs *2pcs *1pc *2pcs *4pcs *6pcs Attach 1 pc N39 to N4 and 1 pc N39 to N2 by using Z2, V3 and V2 as shown in FIGURE 37. Please make sure it's attached at the same height.
  • Page 34 STEP 12 Wood boards needed: Hardware needed: * 7 pcs * 2 pcs *2pcs *1pc *30pcs *14pcs * 7 pcs *16pcs *16pcs Lay 2 pcs N42 on the floor and attach N43 to N42 by using Z6 as shown in FIGURE 41. Please note there is a right and left sequence for the "Hole"...
  • Page 35 STEP 13 Wood boards needed: Hardware needed: *1pc N47A *1pc N47B *1pc *2pcs *1pc *1pc *6pcs *4pcs *1pc *4pcs *10pcs *12pcs *2pcs Place N47A and N47B on the ground, then, insert U19 to N47A and N47B as shown in FIGURE 44. Attach N47A and N47B to N46 by using Z5, Vl, V3 and V6 as shown in FIGURE 45.
  • Page 36 STEP 14 Hardware needed: Wood boards needed: * 1 pc *2pcs *2pcs *4pcs *6pcs *16pcs *6pcs Attach N45 to N24, connect with U2 by using Zl0, Vl and Zll, Vl, V6 as shown in FIGURE 46 for both sides. Attach the assembled "A frame"...
  • Page 37 STEP 15 Wood boards needed: Hardware needed: *2pcs *2pcs *2pcs * 2 pcs This is the Attach N50 to the mid point of 2 pcs of N10A by using Z7, V3 and Vl as shown in FIGURE 48. anchor that needs to go under the ground. _N50 FIGURE 48...
  • Page 38 STEP 16 Wood boards needed: Hardware needed: *1pc *1pc * 4 pcs *15pcs *4pcs *4pcs Attach N51to N25 and N22 by using Z4 and Z6 as shown in the enlarged diagram. Attach U7 to N26 and N27 by using 9pcs Z12 as shown in FIGURE 49 and Enlarged Diagram. Attach U8 to N19B and N41 by using 6 pcs Z12 as shown in FIGURE 49 and Enlarged Diagram.
  • Page 39 STEP 17 Hardware needed: *2pcs *4pcs *4pcs *4pcs Attach V7 and Vlto N45 with V6 as shown in FIGURE 50. Attach the hook on US to V7 as shown in FIGURE 51. FIGURE 50 Hook FIGURE 51...
  • Page 40 STEP 18 Hardware needed: *2pcs *2pcs * 2 pcs * 16 pcs Vl * 2 pcs *2pcs *2pcs * 2 pcs *4pcs *6pcs *4pcs *1pc * 2 pcs *2pcs *4pcs *2pcs *2pcs * 2 pcs *2pcs *2pcs *1pc *2pcs Attach U22 to N45 secure by using Zll, Vl and V6 as shown in FIGURE 52.
  • Page 41 Then,insert U28to U23asshown JoinU25and U23by usingZ15,V12andVll asshownin FIGURE 54. in FIGURE 54. InsertU24into U28asshownin FIGURE 5 5. FIGURE 54 FIGURE 55...
  • Page 42 Attach U23 to U30 by using Z16, Vl and V13 as shown in FIGURE 56. Attach U26 on U25 by using Z17, Vland V13 as shown in FIGURE 57. FIGURE 56 FIGURE 57...
  • Page 43 AttachU27to U23by usingZ18asshownin FIGURE 5 9. FIGURE 59...
  • Page 44 STEP 19 Hardware needed: *1pc *1pc U12A *1pc *1pc *1pc *1pc *1pc "28pc *1pc *1pc *1pc *4pcs *2pcs *2pcs * 2 pcs *2pcs *Spcs *Spcs *4pcs * 4 pcs *2pcs *2pcs *Spcs *2pcs Attach U11to N47A and N47B by using Z9, Vl and V6 as shown in FIGURE 60.
  • Page 45 AttachU14and U15to U16by usingZ21,V15,V16andV17to form a "FRAME" a sshown in FIGURE 6 1. AttachU12Aand U12to the "FRAME" by usingZ22,Z23,V18andV6 asshownin FIGURE 6 2. NOTE: P lease makesurethe holeon the upperendof U12andU12Afaceoutwards. _°°°_ V16 FIGURE 61 FIGURE 62...
  • Page 46 Attach U13 to U12 and U12A by using Z24 and V19 as shown in FIGURE 63. Then, attach U14 and U15 to Ull as shown in FIGURE 64. FIGURE 63 FIGURE 64...
  • Page 47 SPRING ASSEMBLY Lay out U18 and align each triangle ring on the mat toward the opposite hole of the main iron tube frame. Then, attach U17 with the spring hook face down to the triangle ring of the mat. Hold U21 in hand and pull the spring hook on U17 towards hole on the iron tube frame.
  • Page 48 STEP 20 Hardware needed: * 1 pc *1pc *2pcs *4pcs * 8 pcs *4pcs *4pcs Attach Ul0 under U9 by using Z2, V3 and V14 as shown in FIGURE 67. Attach U9 on U8. Then from beneath, attach U29 to U9 by using Z19 as shown in FIGURE 68. FIGURE 67 FIGURE 68...
  • Page 49 CONSUMER PRODUCT SAFETY COMMISSION'S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK * Select Protective Surfacing--One of the most important things you can do to reduce the likelihood serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment...
  • Page 50 * Placement--Proper placement and maintenance of protective surfacing is essential. Be sure to: * Extend surfacing at least 6 feet from the equipment in all directions. * For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to twice the height of the top bar from which the swing is suspended.
  • Page 51 In such event, Sportspower reserves the right to cancel the Limited Warranty coverage immediately. To the extent allowed by the applicable local law, the remedies in the Limited...
  • Page 52 SPORTSPOWER I S NOT RESPONSIBLE ORLIABLE FORINDIRECT,SPECIALORCONSEQUENTIAL DAMAGESARISINGOUT OFORIN CONNECTION WITH THE USEORPERFORMANCE OF THE PRODUCTOROTHERDAMAGESWITH RESPECT TO ANY ECONOMICLOSS,LOSSOF PROPERTY, LOSSOFREVENUEORPROFITS, L OSSOFENJOYMENTORUSE,COSTOFREMOVAL, INSTALLATIONOROTHERCONSEQUENTIAL DAMAGES.SOMESTATES DO NOTALLOW THE EXCLUSIONORLIMITATION OF INCIDENTALORCONSEQUENTIAL DAMAGES.ACCORDINGLY, THEABOVELIMITATION MAY NOT APPLY TO YOU. THEWARRANTYEXTENDEDHEREUNDER IS IN LIEU OF ALL OTHERWARRANTIESAND ANY IMPLIEDWARRANTY OFMERCHANTABILITY ORFITNESSFORA PARTICULARPURPOSE IS LIMITED IN ITS SCOPE AND DURATION TO THETERMSSETFORTHHEREIN.SOMESTATESDO...
  • Page 53 WARRANTY REGISTRATION Please register on-line at www.sportspowerltd.net to tell us more about yourself. This is not required for validation of the normal product warranty, but when you register on-line, we will offer to you extended warranty of 90 days subject to proof of your purchase.