Summary of Contents for Johnson Controls Unitary Products 8000 Residential Steam Humidifier
Page 1
Johnson Controls Steam Humidifier Unitary Products Model 8000 Residential Steam Humidifier Owner’s Manual Includes Safety & Operating Instructions and Warranty Information READ AND SAVE THESE INSTRUCTIONS...
INTRODUCTION FIGURE 1 – Fill and Drain System and Canister Thank you for your recent steam humidifier purchase . We appreciate Steam your business and are pleased to add your name to our growing list of Outlet customers . You have invested in the highest quality equipment available . Your humidifier will require periodic maintenance to assure continued Fill Cup consistent performance .
level probe . At that point, the “Service” light will flash red indicating that INSTALLATION OPTIONS AND EFFECT OF the canister needs to be replaced . The humidifier will continue to operate wATER CHARACTERISTICS but with reduced output . Your Steam Humidifier can be installed to operate using 120 Volts, 208 When the humidifier begins a drain cycle, the fill valve opens to introduce Volts or 240 Volts .
HUMIDIFIER CONTROL & OPERATING INSTRUCTIONS TABLE 1 – Display Panel (continued) Indicator Light Function The control provided with your humidifier is mounted either in your return air duct or on a wall in the living space . The control has a set of contacts Solid Normal Operation .
CHECk THE HUMIDIFIER OPERATION TO REPLACE THE CANISTER Replace the canister annually and when prompted by the “Service” light . Turn the control knob to the maximum RH setting . Make sure that the Use Model S1-8044 Canister . water saddle valve is open and that the humidifier is on . The indoor unit 1 .