Sagem AXIUM HD-L32 User Manual
Sagem AXIUM HD-L32 User Manual

Sagem AXIUM HD-L32 User Manual

Lcd television 32”
Table of Contents

Advertisement

LCD Television 32"
SAGEM AXIUM
SAGEM AXIUM
IMPORTANT:
Please read this guide thoroughly before
using your unit.
Veuillez lire attentivement ce manuel
avant d'utiliser votre téléviseur.
Lesen Sie bitte dieses Handbuch
sorgfältig vor der Inbetriebnahme Ihres
Gerätes.

USER GUIDE

Dear SAGEM Customer,
Congratulations and thank you for choosing the SAGEM AXIUM
This product was manufactured with the greatest care and attention and we hope you will enjoy the
spectacular viewing experience for many years. This product is very diverse and we recommend that
you first refer to the Quick Start Guide on page 4.
We recommend you to keep this document in a safe place in order to be able to refer to it afterwards.
HD-L32
TM
This product is European compliant.
TM
HD-L32 T
If you should incur any potential problem which is not covered in Troubleshooting and Support on
page 70, please contact your retailer or distributor where applicable.
© 2005 SAGEM COMMUNICATION SA. All rights reservedThis document is the property of SAGEM COMMUNICATION SA.
Reproduction without written permission from SAGEM COMMUNICATION SA is strictly forbidden. The information contained in
this document may be changed without prior warning. The brands quoted in this operating manual, SAGEM logo and SAGEM, are
SAGEM COMMUNICATION SA registered trademarks. Virtual Dolby Surround 'Manufactured under license from Dolby Laboratories.
'Dolby', 'Pro Logic' and the double-D symbol are trademarks of Dolby Laboratories.' The 'HD ready' Logo is a trademark of
EICTA. Documentation content can be subject to amendment.
ENVIRONMENT
Preservation of the environment as part of a sustainable development logic is an essential concern of SAGEM
SA. The desire of SAGEM SA is to operate systems observing the environment and consequently it has
decided to integrate environmental performances in the life cycle of its products, from manufacturing to
commissioning, use and elimination.
In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste,
which can have an effect on the environment and human health.
PACKAGING
The presence of the logo (green circle) means that a contribution is paid to an approved
national organization to improve packaging recovery and recycling infrastructures.
To faciliate recycling, respect the sorting rules set up locally for this kind of waste.
THE PRODUCT
The crossed-out waste bin stuck on the product means that the product belongs to the
family of electrical and electronic equipment.
In this respect, the European regulations ask you to dispose of it selectively:
At sales points in the event of the purchase of similar equipment.
At the collection points made available to you locally (drop-off center, selective
collection, etc.).
TM
High Definition LCD TV.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AXIUM HD-L32 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sagem AXIUM HD-L32

  • Page 1: User Guide

    Reproduction without written permission from SAGEM COMMUNICATION SA is strictly forbidden. The information contained in using your unit. this document may be changed without prior warning. The brands quoted in this operating manual, SAGEM logo and SAGEM, are SAGEM COMMUNICATION SA registered trademarks. Virtual Dolby Surround ‘Manufactured under license from Dolby Laboratories.
  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS Batteries Batteries are easily swallowed by young children. Do not allow young children High Voltage This LCD TV is a class 1 appliance; it MUST be connected to an electrical wall to play with the remote control unit. socket equipped with an earth.
  • Page 3: Quick Start Guide

    Quick Start Guide QUICK START GUIDE 4. Attach the display stand to the back of your LCD TV with two (2) M8*30 capscrews using a hexagon key to tighten the capscrews. Display Stand Installation The display stand may not be already assembled when you receive your unit. If it is not, follow the procedure below to install it to your unit before you continue.
  • Page 4: Connection Diagrams

    DTV button on your remote control will light up in yellow each time a button on the remote control is pressed. LCD TV POWER LED REMOTE CONTROL MODE GREEN GREEN TV BUTTON ANALOG TV AMBER YELLOW DTV BUTTON DIGITAL TV* * Available only with SAGEM AXIUM HD-L32 T. * Available only with SAGEM AXIUM HD-L32 T.
  • Page 5: Connecting Your Tv

    Press the EXIT button on your remote control to close the OSD. To tune channels automatically To quickly add all channels that have signals to your channel list, refer to 7-1 Tuning Channels Auto- matically for detailed instructions. * Available only with SAGEM AXIUM HD-L32 T.
  • Page 6: Table Of Contents

    4-4 Plugging In Your LCD TV ................23 are green. When signal and quality are green, 4-5 Turning ON the Power ..................24 press to launch a new channel search. * Available only with SAGEM AXIUM HD-L32 T.
  • Page 7: Before You Start

    9-1 Advanced Digital TV Settings ............... 57 USER GUIDE 9-2 Using Digital TV ...................62 9-5 Digital TV Software Upgrade ............... 69 TROUBLESHOOTING AND SUPPORT ..............70 PRODUCT SPECIFICATIONS ................73 * Available only with SAGEM AXIUM HD-L32 T. * Available only with SAGEM AXIUM HD-L32 T.
  • Page 8: Optional Accessories

    Component (YUV) video cable - 3 RCA to 3 RCA WALL MOUNT KIT The SAGEM wall mount kit, which is sold separately, contains all of the required hardware for mounting your LCD TV on your wall. It is highly recommended that you find a qualified REMOTE CONTROL SENSOR installer to do this.
  • Page 9: Back Connectors

    DTV loop through* - Feeds both analog and digital TV signals to the TV’s tuner and enables independent recording of both analog and digital channels. DTV Antenna In* - Connects to digital broadcast. * Available only with SAGEM AXIUM HD-L32 T.
  • Page 10: Your Remote Control At A Glance

    INFO Shows information about the current input source. 40 41 42 STILL Freezes the displayed image. NUMBER PAD Selects a channel or enters a number. DTV MENU* Activates the DTV* OSD menu. * Available only with SAGEM AXIUM HD-L32 T.
  • Page 11: Basic Lcd Tv Setup

    YUV, HDMI, or VGA, or vice versa. PIP SWAP - Swaps the main and sub pictures. Teletext Index (only in Teletext mode) Teletext List (only in Teletext mode) Teletext Reveal (only in Teletext mode) * Available only with SAGEM AXIUM HD-L32 T.
  • Page 12: Inserting Batteries Into The Remote Control

    Chapter 4 Basic LCD TV Setup Chapter 4 Basic LCD TV Setup Inserting Batteries into the Remote Control Plugging In Your LCD TV Before using the remote control for the first time, insert two AA batteries (supplied). When the 1. Connect the power cord to the power cord connector on the back of your LCD TV (see batteries become depleted and the remote control fails to operate, replace the batteries with 2-2 Back Connectors).
  • Page 13: Turning On The Power

    WARNING! Before connecting any external components, make sure to unplug be green. your LCD TV and any connecting devices to prevent damage. When in digital TV* mode, the power LED at the front of your unit will be amber. * Available only with SAGEM AXIUM HD-L32 T.
  • Page 14: Connecting An Hdmi Device

    Chapter 5 Connecting External Devices Chapter 5 Connecting External Devices Connecting an HDMI Device Connecting a Component Device 1. Connect one end of an HDMI cable (not supplied) to your device and the other to the 1. Connect the green-colored Y RCA jack on the back of your device to the green-colored HDMI connector on the back of your LCD TV.
  • Page 15: Connecting A Vcr Using Coaxial (Rf)

    Chapter 5 Connecting External Devices Chapter 5 Connecting External Devices Connecting a VCR Using Coaxial (RF) Connecting a SCART Device 5-3-1 Video Recorder without Decoder 1. Connect one end of a 21-pin Euro-SCART lead (not supplied) to your device and the other to the SCART connector on the back of your LCD TV.
  • Page 16: Connecting A Computer (Vga)

    Chapter 5 Connecting External Devices Chapter 5 Connecting External Devices Connecting a Computer (VGA) Connecting an Audio Amplifier Device 1. Connect the VGA connector on your computer to the VGA connector on the back of Connect an audio amplifier device to the HiFi Out jack on the back of your LCD TV. your LCD TV with a VGA monitor cable.
  • Page 17: Connecting A Composite Device

    Chapter 5 Connecting External Devices Chapter 5 Connecting External Devices Connecting a Composite Device Connecting an S-Video Device 1. Connect the yellow video RCA from your VCR, camcorder, or digital camera to the 1. Connect the S-Video mini-DIN connector on the back of your S-Video device to the S- yellow AV3 videoRCA connector on the right-side of your LCD TV with an RCA cable VIDEO connector on the right-side of your LCD TV with the correct optional cable.
  • Page 18: Adjusting Tv Settings

    Chapter 5 Connecting External Devices ADJUSTING TV SETTINGS Connecting a Headphone Connect a headphone to the Line Out jack on the right-side of your LCD TV. Basic Operations 6-1-1 Adjusting the Volume You can adjust the volume in two ways - from your LCD TV’s right side panel or by using the remote control.
  • Page 19: Using The Tv On-Screen Display (Tv Osd)

    TO SELECT CHANNELS FROM THE REMOTE - OR - Press the EXIT button to close the OSD. Press (see illustration for location) or use the number pad to input the channel number.. * Available only with SAGEM AXIUM HD-L32 T.
  • Page 20: Osd Menus And Options

    Chapter 6 Adjusting Settings Chapter 6 Adjusting Settings OSD Menus and Options Sound Menu To access the Sound Menu, highlight Sound from the Main Menu and press OK. You can use these OSD menus and options to adjust various settings for your LCD TV. Balance - Adjusts the level of sounds Sound Menu 6-3-1 With Source Input Set to TV...
  • Page 21: Options Menu

    Chapter 6 Adjusting Settings Chapter 6 Adjusting Settings Options Menu 6-3-2 With Source Input Set to AV1, AV2, AV3, or DTV To access the Options Menu, highlight Options from the Main Menu and press OK. NOTE: The Picture, Sound, and Options Menu for these inputs are the same as those for TV and DTV sources.
  • Page 22: Picture Menu

    Chapter 6 Adjusting Settings Chapter 6 Adjusting Settings 6-3-3 With Source Input Set to PC VGA, HDMI, or YUV Setup Menu To access the Setup Menu, highlight Setup from the Main Menu and press OK. NOTE: The Sound Menu and Options Menu for this input is the same as the one for TV.
  • Page 23: Adjusting Picture Settings

    Chapter 6 Adjusting Settings TUNING YOUR ANALOG TV Adjusting Picture Settings Follow these steps to adjust your LCD TV image. 1. Press TV MENU to call up the on-screen display (OSD) main menu. Tuning Channels Automatically (AUTO SEARCH) 2. Press to highlight Picture.
  • Page 24: Tuning Channels Manually (Manual Search)

    Chapter 7 Tuning the Channels Chapter 7 Tuning the Channels Tuning Channels Manually (MANUAL SEARCH) Sorting Channels (PROGRAMME SORT) Use this option to add certain channels to the channel list. To sort the channels so that, for example, BBC1 is stored as number “1”, follow the steps below: TO ADD CHANNELS MANUALLY Programme Sort Menu...
  • Page 25: Removing Unwanted Channels (Manual Search)

    Chapter 7 Tuning the Channels ADVANCED SETTINGS AND FUNCTIONS Removing Unwanted Channels (MANUAL SEARCH) Main Menu TO REMOVE CHANNELS Picture 1. Press the TV MENU button on the Setting the Sleep Timer Sound remote control to open the OSD. Setup The sleep timer allows your LCD TV to automatically turn OFF after a given amount of time.
  • Page 26: Setting Parental Control

    Chapter8 Advanced Settings and Functions Chapter 8 Advanced Settings and Functions Setting Parental Control Setting a Password The Parental Control feature prevents viewers from turning on the TV without entering a You control access to the parental control with a password. The default password is 0000. password.
  • Page 27: Displaying Teletext

    Second press - displays Teletext in Mix mode with transparent background Third press - turns off Teletext. Teletext Index (only in Teletext mode) Teletext List (only in Teletext mode) Teletext Reveal (only in Teletext mode) * Available only with SAGEM AXIUM HD-L32 T.
  • Page 28 Chapter8 Advanced Settings and Functions Chapter 8 Advanced Settings and Functions 8-5-4 Picture and Picture (PAP) To display PIP, on your remote control press and then press (green). The Picture and Picture (PAP) function displays two equal size split screen images so that you To change the main picture source, press the TV, AV, or PC button on your remote can watch two programs at a time.
  • Page 29: Multi-Channel View Mode

    You can cancel the scanning process at any time Displays a 4:3 input picture stretched to full screen. The picture is by pressing EXIT. progressively stretched from the center third of the screen outward. * Available only with SAGEM AXIUM HD-L32 T.
  • Page 30 Chapter 9 Digital TV (DTV) Chapter 9 Digital TV (DTV) RESET USER PREFERENCES (APPEARANCE PREFERENCES) Use this option only if you have to start the com- NETWORK MONITORING - Set to NO if you do not want the decoder to scan automatically plete installation procedure all over again.
  • Page 31: Favourite Lists

    Chapter 9 Digital TV (DTV) Chapter 9 Digital TV (DTV) FAVOURITE LISTS NOTE: To erase a channel, highlight the channel to be erased and press the RED button on your remote control. This function allows you to create FAVOURITE LISTS of TV channels or radio stations To insert a new channel from main list A (for example if you have forgotten from a reference list ALL CHANNELS (built from provider (transponder) installation or a to put it in position 5).
  • Page 32: Using Digital Tv

    Chapter 9 Digital TV (DTV) Chapter 9 Digital TV (DTV) Using Digital TV 9-2-2 Program Information Every time you change channels, you will receive program information for a few seconds (in Access the DTV OSD main menu by pressing the DTV MENU button on your remote the User Preferences menu (see 9-1-2 Changing User Settings), you can select how long control.
  • Page 33: Extended Program Information

    Chapter 9 Digital TV (DTV) Chapter 9 Digital TV (DTV) 9-2-3 Extended Program Information 9-2-4 TV Channel List You can display information about programs currently being broadcasted as well as those that When viewing TV programs, press OK to display the current channels list. will be broadcasted next.
  • Page 34 Chapter 9 Digital TV (DTV) Chapter 9 Digital TV (DTV) 9-2-6 Enhanced Program Guide 9-2-7 Freeze Video To display more detailed information about a selected program, press the GUIDE button. To The current video image can be frozen using the STILL button. Pressing the button again to remove this information, press the EXIT button.
  • Page 35: Digital Tv Software Upgrade

    Chapter 9 Digital TV (DTV) Chapter 9 Digital TV (DTV) Digital TV Software Upgrade 9-2-8 Radio Mode The Download Process screen appears after startup Press the RADIO button on the remote control to when a new version of software is available on the access radio mode.
  • Page 36: Troubleshooting And Support

    LCD TV may not display correctly. Pixel defects within Use OSD menus to restore the factory default color settings. industry specifications are inherent to this type of product and do not constitute a defective product. * Available only with SAGEM AXIUM HD-L32 T.
  • Page 37: Product Specifications

    If this troubleshooting information does not resolve your problem or if you have other ques- TV SYSTEM tions relating to your LCD TV, please visit our website www.sagem.com or contact your local frequency range 45,5 - 85,25 MHz ( VHF-UHF-Cable tv) dealer.
  • Page 38 Size (W x H x D) in cm 104 x 55,8 x 14,3 Packaging size (WxHxD) in cm 117,5 x 750 x 37,5 Weight : Net / Gross in kg 23.5 / 30 kg * Available only with SAGEM AXIUM HD-L32 T. 252111035 ind. A...

This manual is also suitable for:

Axium hd-l32 t

Table of Contents

Save PDF