Lenovo IdeaPad U310 Touch Hardware Maintenance Manual page 52

Lenovo IdeaPad U310/U410 U310/U410 Touch Hardware
Maintenance Manual
Figure 3. Removal steps of hard disk drive (continued)
U410/U410 Touch: Hold the SATA receptacle connector with one hand and pull
the hard disk drive (secured in the metal frame) in the direction shown below to
detach the connector.
Remove four screws
When installing: Make sure that the HDD connector is attached firmly.
48
c
Step Screw (quantity)
c
M3.0 × 3.0 mm, flat-head, nylok-coated
(4)
and detach the metal frame from the hard disk drive.
c
c
Color Torque
Silver 3.0 kgfcm