Selecting A Stored Station; Improving Radio Reception; Listening To A Cassette; Cd Synchro Record Feature - Samsung MAX-A54 User Manual

Selecting a Stored Station

ENG
You can listen to a stored radio station as follows:
1
Switch the system on by pressing STANDBY/ON.
2
Select the TUNER function by pressing FM(TUNER) on remote con-
trol.
3
Press the TUNING MODE button on the remote control or on the
front panel until "PRESET" is displayed.
4
Turning MULTI JOG on the front panel left or right until the desired
station is found or press / to select the desired station.
or
Select the desired station by pressing the
TUNING/ALBUM or button on the remote control.
Result: The desired station is now received.
TUNER
FM
2
STANDBY/ON
1
FM
CD TUNER TAPE AUX
2
DISC
POWER
OPEN/CLOSE SKIP
1
TIMER TIMER/CLOCK PROGRAM/SET
ON/OFF
SLEEP SHUFFLE CD REPEAT
MO/ST DEMO DIMMER
REC/PAUSE TAPE 1/2 P.BASS
TAPE
4
MP3-CD/CD
MUTE
TUNING
VOLUME /ALBUM
POWER SOUND SOUND MODE TUNING MODE
3
+10
16

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM aerial
Testing the positions of the FM aerials before fixing them permanently
If reception from a specific FM radio station is poor, press MONO/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
STANDBY/ON
1
PLAYBACK
FULL LOGIC CONTROL
REC/
PAUSE
CD/
MP3-CD TAPE AUX
3
4
4
MULTI JOG
4

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to
the section entitled "Precautions When Using Audio Cassettes"
on page 23.
1
Switch the system on by pressing the STANDBY/ON button.
2
Select the TAPE function by pressing TAPE on the front panel.
PAUSE
3
Open either cassette TAPE1 or 2 by pushing and releasing the Tape
CD/
cover where PUSH EJECT (
TUNER MP3-CD TAPE AUX
FM
4
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
MULTI JOG
5
Close the Tape by pushing on it until it clicks into place.
Result: Depending on the Tape selected, the 1 or 2 indication is
displayed in front of the TAPE.
6
If you have inserted two cassettes, press TAPE1/2 on the front panel
or directly the TAPE1/2 button on the remote control to select the
cassette to be played.
2
REC/PLAY
CD SYNCHRO RECORDING
Result: Depending on the Tape selected, the TAPE 1 or TAPE 2
indication is displayed.
7
To listen to...
Side A,B
Result: The cassette starts playing.
When the cassette is stopped, select one of the following functions
as required or on the remote control.
8
Main Unit
To...
Rewind the cassette
Fast-forward the cassette
Remote Control
To...
Rewind the cassette
Fast-forward the cassette
9
To...
Stop the playback
When the Tape magnetic core can't auto restore, refer to the
below methods:
1. In Standby/On mode, press and hold the STOP button for 5
seconds, the unit will be reseted. then when you turn on the
unit, the tape deck will be restored.
2. In tape stop mode, press and hold the STOP button for 5 sen-
conds, the tape deck will be restored.
3. If you first use the main set, when you turn on the unit, the
tape deck will be restored.
STANDBY/ON
1

CD Synchro Record Feature

You can record a compact disc on a cassette in two different ways:
Synchronize recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
Switch the system on by pressing STANDBY/ON.
2
Insert a blank cassette in TAPE2.
) is written. 3
Select the CD function by pressing MP3-CD/CD on the front panel.
4
Load a compact disc.
5
Select the required disc.
6
Select the required track and press CD SYNC. or press CD SYNC.
directly to start recording at the beginning of the disc.
Result: REC and SYNC are displayed and recording starts.
7
To stop recording, press
Press ...
TAPE ( )
STANDBY/ON
1
Press...

Recording a Compact Disc

The direct recording mode enables you to start recording with
any track on the compact disc.
Press ...
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
1
Switch your system on by pressing STANDBY/ON.
Press ...
2
Insert a blank cassette in TAPE2.
3 Select the CD function by pressing MP3-CD/CD on the front panel.
4 Load the compact disc.
5
Select the required disc.
6
Select the required track on the compact disc and press
panel or on the remote control to set the compact disc player to Pause
mode.
7
Press the REC/PAUSE.
Result: REC is displayed.
8
Press the to start playing the track.
Result: The track is recorded on the cassette.
9
To stop recording, press
REC/
PAUSE
2,7
CD/
TUNER MP3-CD TAPE AUX
FM
8
8
9
MULTI JOG
STANDBY/ON
6
1
ENG
.
6
REC/
PAUSE
CD/
TUNER MP3-CD TAPE AUX
FM
3
7
MULTI JOG
on the front
.
7
REC/
PAUSE
CD/
TUNER MP3-CD TAPE AUX
9
FM
3,6,8
MULTI JOG
17