Advertisement
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your area). Automatically
allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort
numbers manually and clear any channels you do not wish to watch.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTERE button.
2.
Press the ▲ or ▼ button to select Auto Store, then press the ENTERE
button.
If a channel is locked using the Child Lock function, the PIN input window appears.
N
3.
Press the ▲ or ▼ button to select the channel source to memorize.
Press the ENTERE button to select Start.
Digital & Analogue: Digital and Analogue channels.
N
Digital: Digital channels.
Analogue: Analogue channels.
Scans for all channels with active broadcast stations and stores them in the TV's memory.
N
If you want to stop Auto Store, press the ENTERE button.
N
The Stop Auto Store? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press the ENTERE button.
4.
Press the EXIT button to exit.
Troubleshooting
My TV is out of order.
TV HD is displayed, but
the visual quality is not
good.
The picture on the
TV screen is broken
intermittently (a mosaic or
distorted).
I cannot control the TV
using the remote control.
A strange sound is
generated by the TV.
Why?
• The visual quality may be degraded
when the broadcasting stations convert
the analog signal to digital. (Although
you are watching digital broadcasting,
the video source is analog.)
• This may occur when the broadcast
signal received by the TV is too weak
or unstable.
• When the battery is flat.
• When it is not in TV mode.
• When the remote control malfunctions
temporarily.
• Sound may be generated by the
temporary swelling and shrinking of the
plastics in the TV due to temperature
and humidity changes.
• Temporary electronic oscillation
sounds may be generated due to the
characteristics of the TV
Try this.
• Check the transmitting signal of the
corresponding cable TV network or
broadcasting station.
• Check the transmitting signal of the
corresponding cable TV network or
broadcasting station.
• If you are using a publically shared
antenna, check the signal by asking
your apartment manager.
• Replace the battery and then retry.
• Press the TV button on the remote
control to select TV mode.
• Some noise can be heard due to the
characteristics of the product.
English -
Country
: Australia
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide
: Full Guide
Channel List
Channel Mode
Advertisement
