Recording Setup - D-Link Storage User Manual

Recording Setup

To access the recording setup window, click Setup and then
Recording Setup on the left side of the screen.
You can use this page to set a quota for recordings. By
default, the NAS will keep the last 7 days of recordings and
automatically overwrite them. Click the Estimate Required
Space button to let the software calculate, based on your
settings, how much space will be required each day. This
can assist you in making a decision about how much space
to allocate to the recordings.
Event Record allows you to specify a lead-in time in seconds
to pre-record and a lead-out time to continue recording
before and after a scheduled recording.
Use the Record Mode radio buttons to select how you want
to record. If you select to record by schedule, you will be
able to set a schedule using the graph below. Click on the
color of the function you want to perform and then click
in the box for the day and time that you want it to perform
that function. Always Record means that the camera will
always record for the specified period, Motion Detection
will wait for motion on the camera to be detected before
it begins recording and Manual Record requires you to
manually click a record button to begin recording.
Click Save Settings when you have finished making
changes.
D-Link Surveillance Center Addon 21