On/Off Switch; Battery Removal - Conair CTX184CPC Important Safety Instructions Manual

14 pieces grooming system multi-use
Table of Contents

Advertisement

the longest trim setting adjustment. (You can always
go back and cut your mustache more closely with a
shorter setting.)
alwayS trIm your muStache
from the top down
4. After your mustache has been
trimmed to the desired length,
remove the 5-position comb
and, using the blades only,
define the outline of the bottom
of your mustache.
5. Use the scribe blade for fine detailing and hair art.

on/off SwItch

To operate, simply slide switch toward blade, to stop
push slide away from blade.
care of your trImmer
replacement (removal) of blade Set
To remove blade set from
your trimmer, make sure the
trimmer is in the OFF posi-
tion. Remove the blade set by
placing thumb against the
smaller cutter and pushing
forward, releasing the cutter
assembly from the trimmer
housing. Replace with new cutting system and
reverse the removal procedure, only this time
place your thumb on the large cutter and snap
into place. Make sure the taper control is set to
the longest #1 position.

battery removal

CONTAINS NICKEL CADMIUM
BATTERY. MUST BE
COLLECTED, RECYCLED OR
DISPOSED OF PROPERLY. DO
NOT DISPOSE OF IN
THE MUNICIPAL WASTE.
1. Using a small Phillips head screwdriver, remove the
screws at the back of the trimmer.
2. Remove the bottom housing and push the batteries
out. Bring the batteries to the nearest collection centre
for proper disposal. DO NOT throw the batteries into
the normal municipal waste system.

Advertisement

Table of Contents
loading

Table of Contents