Safety Precautions The following safety precautions must be taken into account when using this product. N Do not install this product in places where it will come into contact with WARNING combustible gases such as sulfuric gas, hydrogen gas, methane gas, etc. N Do not install this product in places that are exposed to direct sunlight, near heating equipments and wet places.
View of the Unit Main Unit Air outlet Air flow blade Control panel Dust sensor Odor sensor Filter box Power plug Front panel 8 Step Cleaning System Recovery Filter Washable Filter Section Section Pre-filter Ionizer Electrostatic Metal Nano Anti-bacterial Anion TiO 2 generator filter...
Control Panel Anion Indicator Operating Mode Indicator Indicator Clean level Indicator Contamination Level Indicator Filter Reset Button & Indicator Power Button Anion Button Clean Level Selection Button Operating Mode Selection Button N Contamination Level Indicator Classifies the various contaminants in the indoor air, as Odor, Mote and Dust, and up to 5 levels can be displayed.
etting Started You have just purchased an air cleaner and it has to be installed according to the safety precautions of page 2. This manual contains important information concerning the use of your air cleaner. Please take some time to read this booklet as it will help you take full advantage of the product's features.
Selecting the Automatic Mode In the Automatic Mode, the air cleaner automatically adjusts the clean level according to the signal of the more contaminated level after comparing the dusts and motes contamination level with the odor contamination level in the indoor air. Anions are generated into an air automatically and the air flow blade does not move.
Selecting the Pollen Mode The Pollen Mode can eliminate pollen and dust particles effectively in the indoor air. In this operating mode, the air cleaner automatically adjusts the clean level according to the dusts or motes contamination level without the odor contamination level in the indoor air.
Selecting the Sleep Mode If you wish the air cleaner to clean the air in your room quietly, select the Sleep Mode. In this operating mode, the air cleaner runs in "Low Speed" which is the quietest clean level setting. Anions are generated into an air automatically and the air flow blade does not move.
Selecting the Odor Mode If you select the Odor Mode, the air cleaner can eliminate airborne contaminants and harmful smells effectively in the indoor air. In this operating mode, the air cleaner automatically adjusts the clean level according to the signal of the odor contamination level without the dusts and motes contamination level in the indoor air.
Generating Anions The Anion Generator generates anions, which are beneficial to the human body. Use this function if you want to feel refreshed both physically and mentally, just as if you were in the midst of a forest. If the air cleaner is turned on, anions are generated automatically. If necessary, press the (Power) button.
Adjusting the Clean Level (Fan Speed) The air cleaner automatically adjusts the clean level according to the contamination levels of the indoor air. It is also possible for you to manually select the clean level. If necessary, press the (Power) button. N The Power indicator on the display comes on.
Operating Recommendations Here are a few recommendations that you should follow when using your air cleaner. Topic Recommendation Wash indicator If the light on the "Wash" indicator comes on, the washable filters must be cleaned. The washable filters must be cleaned more often in environments that include large amounts of dust in the air.
Cleaning the Air Cleaner Cleaning the Lens of the Dust Sensor To get the best possible result from your air cleaner, you must clean the lens of the dust sensor regularly. The dust sensor is responsible for sensing the accumulation level of small and big dust particles in the air in your room.
Cleaning the Washable Filters Washable Filters are responsible for eliminating fine particles of dust, molds and mites in the air that are as small as 0.5 microns. It also has the function of sterilizing virus or bacteria in the air in your room. You must clean the Washable Filters every 3 months or whenever the Wash Indicator comes on.
Cleaning the Air Cleaner (cont.) Recovering the photocatalyst filter The phototcatalyst filter eliminates various odors in the indoor air. Open the filter box and pull out the Recovery Filter Section towards in the direction of the arrow. Recovery Filter Section Dry the Recovery Filter Section under the sunlight at least for 8 hours.
Solving Common Problems Before contacting the after-sales service, perform the following simple checks. This may prevent you from making an unnecessary call and wasting your time and money. Problem Explanation/Solution N Check for a power failure. The air cleaner does not N Check that the power plug is plugged in tightly.