Installing The Drivers; Installing The Software - TerraTec Cinergy 2400iDT Manual

Installing the drivers

WHQL-certified. A few advance remarks before we get into the details. To make the
installation of the Cinergy as pleasant an experience as possible, we spared no trouble or
bureaucratic hurdles and had the Windows drivers certified by the Microsoft Windows
Hardware Qualification Lab (WHQL). So enough talk... let's start!
Driver installation under Windows XP or XP MCE
Groundhog day. As we already pointed out above, the operating system sees the various
components of the Cinergy as individual devices. This means repeating the following
installation steps until Windows stops recognizing new devices. That may seem a bit tiresome,
but necessary to ensure that the driver installation is complete and correct. Off we go...
If you have not already done so, place the TerraTec Cinergy 2400i DT Installation CD into your
CD-ROM drive. If the autostarter launches, please ignore it for the time being.
1. The next time you start your computer, Windows XP will recognize a new "multimedia
controller" and will launch the hardware installation wizard. Next, select "Install the
software automatically [Recommended]" and click "Next".
2. Windows XP will automatically find the correct driver on the TerraTec Cinergy 2400i DT
installation CD.
3. Conclude the installation by clicking "Finish".

Installing the software

After the drivers have been successfully installed, you should now install the required
programs for the Cinergy 2400i DT. If the autostarter is already open, simply click through the
offer.
If the autostarter has not appeared, double-click on the symbol for your CD or DVD drive in the
Windows Explorer.
Cinergy 2400i DT (English) 9