Table of Contents
Advertisement
Accessories
Depending on the model that you have purchased, you are supplied with
several accessories that can be used in a variety of ways.
EN
1. Coupler, to be placed correctly over the motor shaft in the
base of the oven.
Purpose:
2. Roller ring, to be placed in the center of the oven.
Purpose:
3. turntable, to be placed on the roller ring with the center
fitting on to the coupler.
Purpose:
4. Metal racks (High rack, Low rack), to be placed on the
turntable.
Purpose:
5. Clean water bowl, to be placed in the right side of the
oven.
Purpose:
6. Rotisserie spit
Purpose:
7. Crust plate, to be placed on the turntable.
Purpose:
The coupler rotates the turntable.
The roller ring supports the turntable.
The turntable serves as the main cooking
surface; it can be easily removed for
cleaning.
The metal racks can be used to cook two
dishes at the same time. A small dish may
be placed on the turntable and a second
dish on the rack. The metal racks can be
used in grill, convection and
combination cooking.
The water bowl can be used to clean.
The roasting spit is a convenient way of
barbecuing a chicken, as the meat does
not have to be turned over. It can be used
convection combination cooking.
The crust plate is used to brown food better
in the microwave or grill combination
cooking modes and to keep pastry and
pizza dough crisp.
8. Square Metal Rack, to be placed in the supporter rack.
Purpose:
9. Square Metal Tray, to be placed in the supporter rack.
Purpose:
10. Supporter Rack, to be placed in the right and left of the
oven.
Purpose:
4
The square metal rack is used for the
convection cooking. (Refer to the page
18)
The square metal rack is used for the
convection cooking. (Refer to the page
18)
The square metal rack is used for the
convection cooking. (Refer to the page
18)
Advertisement
Table of Contents
