Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
2 HORSEPOWER
120 Volt
14" INDUSTRIAL
4-1/2"
CUT-OFF SAW
WITH LASER GUIDE
Angle Grinder
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
ITEM XXXXX
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS mAnUAL.
ITEM 69645
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Drill Master 69645
Summary of Contents for Drill Master 69645
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS mAnUAL.
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-800-444-3353. Item 69645... -
Page 3: Electrical Safety
A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Item 69645 For technical questions, please call 1-800-444-3353. Page 3... - Page 4 Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Page 4 For technical questions, please call 1-800-444-3353. Item 69645...
- Page 5 15. Do not operate the power tool near flammable for one minute. Damaged accessories will materials. Sparks could ignite these materials. normally break apart during this test time. Item 69645 For technical questions, please call 1-800-444-3353. Page 5...
- Page 6 These carry important safety information. If unreadable or missing, contact 24. WARNING: Some dust created by power sanding, Harbor Freight Tools for a replacement. sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State 18. Avoid unintentional starting.
-
Page 7: Kickback And Related Warnings
Do not use excessively oversized sanding disc paper. Follow manufacturer’s recommendations when selecting sanding paper. Larger sanding paper extending beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback. Item 69645 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Safety Warnings Specific For Wire Brushing Operations
7. To reduce vibration, maintain the tool as tingling, numbness, and white or blue fingers), explained in this manual. If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. SAVE THESE InSTRUCTIOnS. Page 8 For technical questions, please call 1-800-444-3353. Item 69645... - Page 9 National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Item 69645 For technical questions, please call 1-800-444-3353. Page 9...
-
Page 10: Extension Cords
“W-A” (“W” in * Based on limiting the line volt- Canada) to indicate it is acceptable for outdoor use. TABLE A age drop to five volts at 150% of the rated amperes. Page 10 For technical questions, please call 1-800-444-3353. Item 69645... - Page 11 Do not cover ventilation ducts. Keep flammable objects away. n 0 xxxx/min. No Load Revolutions per Minute (RPM) WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 69645 For technical questions, please call 1-800-444-3353. Page 11...
-
Page 12: Specifications
2. Screw the threaded end of the in one of three positions, on either side Auxiliary Handle into the selected position. or on top of the Gear Housing. Tighten securely before beginning work. Page 12 For technical questions, please call 1-800-444-3353. Item 69645... - Page 13 Functions Spindle Lock Auxiliary Handle Switch Wheel Guard Wheel Guard Bolt Figure A Item 69645 For technical questions, please call 1-800-444-3353. Page 13...
-
Page 14: Important Safety Information
45° from the vertical center line on each side of the wheel and 1 – 2 inches from the edge of the wheel (see Illustration). Page 14 For technical questions, please call 1-800-444-3353. Item 69645... -
Page 15: General Operating Instructions
Clean, then If the tool bogs down, use lighter pressure. store the tool indoors out of children’s reach. Item 69645 For technical questions, please call 1-800-444-3353. Page 15... -
Page 16: Maintenance
Storage area must be kept dry, and above that have been dropped or bumped. freezing. Any grinding or cut-off wheels exposed to humidity or freezing temperatures must not be used. Page 16 For technical questions, please call 1-800-444-3353. Item 69645... -
Page 17: Troubleshooting
Use only proper type of disc accessory in good condition. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 69645 For technical questions, please call 1-800-444-3353. Page 17... -
Page 18: Parts List And Diagram
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 18 For technical questions, please call 1-800-444-3353. Item 69645... -
Page 19: Assembly Diagram
Assembly Diagram Item 69645 For technical questions, please call 1-800-444-3353. Page 19... -
Page 20: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 69645 and is the answer not in the manual?
Questions and answers
carbon brushes
The specifications of the carbon brushes for Drill Master part number 69645 are not provided in the context. It only states that carbon brushes are internal to the motor housing and should be checked or maintained by a qualified service technician.
This answer is automatically generated
How can I order replacement parts