Camera - Helio Kick Flip User Manual

1. Camera

In idle mode, press , select Snap, then select 1. Camera.
OR
Press and hold .
Set the menu options as needed. Press
Press to turn on the flash. Press
Flash: Turn the flash on/off: Off, Auto, On.
Resolution: Specify the resolution: 240×320, 320×240, 640×480, 800×600, 1280×960, 1600×1200.
Quality: Specify the image quality: Small, Normal, Fine, Superfine.
Zoom: Zoom in/out (not supported when the resolution is set to 800×600 or higher).
Series: Turn on continuous shooting. Up to nine frames are supported. For more information on continuous shooting, see
"Camera Setup" on page 59. (Continuous shooting is supported only when the resolution is set to 240×320 or 320×240.)
Stickers: Overlay the photo with a sticker. Ten stickers are available. (Sticker shooting is supported only when the
resolution is set to 240×320.)
Brightness: Adjust the image brightness.
Light: Select the lighting mode: Auto, Cloudy, Daylight, Fluorescent 1, Fluorescent 2, Light Bulb.
to shoot a photo. To save, press
to open the camera menu:
then enter a name.
53