Samsung DMT350 Series User Manual page 9

5
CyCle
5
SeleCTOR
CANCel &
6
dRAIN
pOWeR
7
START & pAUSe
8
You can select options (Delay start, Sanitize) before starting a cycle. If you change the cycle after
selecting an option, the original cycle is reset.
DMT350_DD68-00080A.indb 9
6
Select the appropriate wash cycle depending on the soil level of your
dishes. After you select a cycle, the Cycle On light for that cycle lights up.
If you want to cancel the selected cycle, press the selected cycle button
again.
To cancel a cycle currently running and drain the dishwasher, hold down
both the Heavy and Delicate buttons for three (3) seconds.
When you press the Power button, the entire display turns on and off, and
then the light of the most recently finished cycle lights up.
When the cycle you selected has finished, all other indicator lights are
turned off and the "Clean" light is illuminated for 10 minutes.
Then, the Power turns off automatically.
In Power on condition, close the dishwasher door and select the cycle and
desired options, Press the Start/pause button to begin the cycle.
When you want to pause the dishwasher while running, press the Start/
pause button and make sure to open the door slowly and carefully.
7
setting up your dishwasher _9
8
2010-08-30 3:34:31