Buick Regal 2014 Owner's Manual page 282

1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Push the release tab toward the
lamp assembly.
2. Pull the lamp assembly down to
remove.
3. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket (1).
5. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
6. Push the lamp assembly back
into position until the release tab
locks into place.
Back-up Lamp
Fog Lamp
Front Turn Signal
Lamp (Base)
Front Turn Signal
Lamp (Uplevel)
Front Sidemarker
Lamp (Base)
Low-Beam
Headlamp (Base)
License Plate Lamp
Daytime Running
Lamp (DRL) (Base)
Stoplamp/Turn
Signal Lamp
Taillamp/
Sidemarker Lamp
For replacement bulbs not listed
here, contact your dealer.
3157 K
H10
WY21W
Exposure to high voltage can
cause shock, burns, and even
PSY24W
death. The high voltage
components in the vehicle can
194NA
only be serviced by technicians
with special training.
HIR2
High voltage components are
identified by labels. Do not
remove, open, take apart,
194
or modify these components.
W21/
High voltage cable or wiring has
5W ULL
orange covering. Do not probe,
3157 K
tamper with, cut, or modify high
voltage cable or wiring.
3157 K