access the menu, then select Connectivity > Data account.
Press
2.
Set the parameters based on the information obtained from your
3.
service provider.
Press
4.
If the data account provided by your service provider already
exists, you do not need to create a data account.
Setting the WAP
Select Menu > Services, press
1.
access the menu, then select Internet service > Settings > Profiles.
Select Add new, and then press
2.
Set the Internet parameters based on the information obtained
3.
from your service provider.
Press
4.
Select your service provider, press
5.
select Activate.
If the profile supported by your service provider already exists,
select the profile, press
Activate.
Connecting to a Network
Press Menu > Services, press
1.
access the menu, then select Internet service > Input address.
Enter a Uniform Resource Locator (URL) address.
2.
Press
3.
address.
(Options), and then select Add.
(OK) to save the settings.
(Done) to save the settings.
(Options), and then select Done to access the
(Options), select Go to to
.
(Options), and then
(Options), and then select
(Options), select Go to to
26