If your phone does not work properly or if crashes occur,
press the battery reset button on the right of the SIM card
slot, and then press and hold
until the phone is powered on again.
Charging the Battery
Connect the small end of the universal serial bus (USB) cable to
1.
the phone's charger jack and the larger end to the charger.
Connect the charger to a power socket.
2.
Wait until the battery is completely charged.
3.
While the battery is charging, the charging icon blinks. When the
charging icon stops blinking, the battery is fully charged.
Unplug the charger from the power socket and the USB cable
4.
from the phone.
Navigating the Main Menu
In standby mode, press
1.
Press
2.
(Select) to access the application.
Press the number key labeled with the serial number of the
3.
desired option, or press
desired option, and then press
option.
Press
4.
To return to the standby mode, press
to scroll to the desired application and press
(Back) to return to the previous menu.
for about 3 seconds
(Menu).
or
(Select) to access the
6
to scroll to the
.