Subscribe to Our Youtube Channel
Related Manuals for Wisper Cool SPOTcooler P-200
Summary of Contents for Wisper Cool SPOTcooler P-200
- Page 1 Contents Introduction Features Directions for Use Cautions Maintenance Troubleshooting Cooler Warranty Replacement Parts ® P-200 _.
-
Page 2: Introduction
Introduction Please read this manual carefully, It will show you how to maintain and operate your cooler safely and efficiently and obtain full benefit from its many built-in features. This product does not require assembty. Caution: Always unplug the cooler from the electrical receptacle before attempting to open or service this cooler. -
Page 3: Directions For Use
Directions for Use 1 Fill the cooler with water. Disconnect the power to the cooler before filling. Open the water inlet door and pour in clean water. The water capacity is 1.5 gallons (6 liters). The minimum amount of water needed for the pump to operate is .5 gallon (2 liters). -
Page 4: Cautions
Cautions Tipping/Spilling This cooler may contain water. To avoid spills, ensure that the cooler is moved carefully and is not tilted or bumped. Always unplug the cooler from the electrical receptacle before moving or servicing. Stability Do not place anything on top of the cooler. Cleaning Always unplug the cooler from the electrical receptacle before cleaning. -
Page 5: Maintenance
Maintenance Unplug the cooler from the power supply before servicing. At least once a year, at the end of summer, it is advisable to clean your cooler to maintain its efficiency. 1 Drain the water. The drain plug is located on the underside of the cooler. -
Page 6: Troubleshooting
Troubleshooting Guide Condition Probable Cause Cooler will not operate at first. The power outlet or supply is faulty. Wrong voltage. Cooler stops operating after running The motor overheated (safety cutout). for some time. No cooling. Cooling control is off. Reservoir is empty. Weather is too humid. - Page 7 Remedy Switch on the power outlet, Check the power supply and the power outlet. Check that the power supply is the same as specified on the rating label. Wait 30-45 minutes for motor to cool clown and it will restart automatically. If the condition persists take the cooler to a service agent.
- Page 8 Portable Evaporative Cooler Limited Warranty AdobeAir, Inc., warrants to its customers and/or consumer purchasers of this portable cooler that the cooler and the parts thereof, except the evaporative cooler pad media, will be free from defects in material and workmanship for a period one year from the date of initial purchase.
Need help?
Do you have a question about the SPOTcooler P-200 and is the answer not in the manual?
Questions and answers