With plug and play features and minimum installation time, each UVE7312-MSBC can be configured into either CO for central side or RT for remote side by dip switch setting. The UVE7312-MSBC conforms to the ITU-T G.993.1 and G.993.2 to meet VDSL / VDSL2 and SG15Q4 DMT for network requirements.
4. Packing Contents Inside the package you should find: (1) One UVE7312-MSBC VDSL2 Cable Extender (2) One AC to DC Power Adaptor (5VDC/2A) (3) One User Manual CD Please check if the packing is damaged or any component is missing. If so, please contact your...
5. LED Indicators On the front panel of UVE7312-MSBC, there are 5 LED indicators as the following POWER: “Green On” indicates power is on and normal. LAN1: “Green On” indicates Ethernet LAN1 port is in connection. “Flashing” indicates Ethernet LAN1 data activities.
Pin 2: Mode for impulse noise protection Interleave mode: Protection for up to 250ms impulse noises with latency less than 6 ms. Fast mode: Direct data transmission with latency less than 1ms. Pin 3: Rate limit control 50/20 Mbps: Line rate limited to 50 / 20 Mbps. Full Rate: Provides up to 100Mbps / 60Mbps line rate in short line.
Need help?
Do you have a question about the UVE7312-MSBC and is the answer not in the manual?
Questions and answers