Table of Contents
Advertisement
Disconnect the mobile phone, charger, and socket after charging finish.
Attention:
Please always charge the battery at place temperature between 5
damage the phone and violate regulation and warrantee.
When mobile phone switch off due to out of power or the indicator sign shows run low battery, charge the battery in time. Battery charging
time depends on the remaining battery charge.
The stand by time and call time of this mobile phone is tested in an idealistic environment. In reality it is greatly affected by the signal
strength of the cellular network, working environment and other factors
Do not remove the battery during charging. Please make sure the battery is in place before charging.
When charging is finished, unplug the adapter from the power outlet and from the phone.
If you do not unplug the adapter from the power outlet and from the phone, after 5 to 8 hours, the phone will start charging again due to the
failure of battery power. We strongly suggest not to do so. It will shorten the lifespan of batteries.
2.3
Connecting network
2.3.1
SIM card
Please insert the SIM card before switch on the mobile phone. SIM card is the key to GSM network.
When you subscribe to a cellular network, the plug-in SIM card loaded with our subscription details such as your call history, call record,
messages, and others. SIM card can be removed and inserted into any GSM mobile phone ( new mobile phone can read SIM card
simultaneously)
The plug-in SIM card and its contacts can be easily damaged by scratches or bending, please keep SIM card away from electric, magnetic
objects. Once the SIM card is damaged, it will lose the accessibility to GSM network.
Warning: Switch off the mobile phone before remove the SIM card. It is forbidden to remove the SIM card when the power resource is
connected.
2.3.2
Insert and remove SIM card
Handle the SIM card with care.
Insert SIM card
Switch off mobile phone and remove external electrical source.
As shown on the picture, insert SIM card into the SIM card slot.
Remove SIM card
Switch off the mobile phone and remove electrical source.
As shown on the picture, slide the SIM card out from SIM card slot to remove it.
2.3.3
Power on or off
Press and hold the POWER button for about 3 seconds to turn on or off the phone.
2.3.4
Unlock the SIM card
To eliminate unauthorized usage, SIM card can be locked by adding PIN number. Once select this function, PIN must be inputted every time the
mobile is switch on. If user does not set SIM card protection method, SIM card can not be protected from unauthorized usage.
Press End key to switch on.
Input PIN number, use Right soft key to erase wrong input. Press OK key to finish. For example, if PIN is 1234, then please input 1234.
If wrong input for 3 times, the SIM card will be locked by the network. It requests PUK1 number, which you can get from your Service Provider.
For Detailed information please refer Security setting
Attention: The network supplier will set a standard PIN (4 Digits) for your SIM card. Please change it to your personal password. For detail
please see Security setting
2.3.5
Unlock the mobile phone
Please set phone password to protect your mobile phone from unauthorized usage. Once select this function, phone password must be inputted
every time the mobile is switch on. If user does not set phone password protection method, the mobile phone can not be protected from unauthorized
usage
Input mobile phone password, use Right soft key to erase wrong input. Press OK key to finish. For example, if the password is 0000, then
please input 0000.
If you forget the mobile phone password please contact the local sales branch or service centre to unlock the mobile phone. (Default
mobile phone password is 0000
.
O
O
C～40
C
Use only the supplied charger. Unauthorized charger may
7
Advertisement
Table of Contents
