Table of Contents
Advertisement
B. Log Assembly
•
Check all logs and log base for damage. Do not use damaged or broken components!
•
Position the log base over the burner making sure to align the dimple in the log base over the locating button on the
burner top (see Figure 2.1 for locating button).
•
Position the logs by placing the corresponding letter/number combinations located on the logs (Figure 6.3) with those on
the log base (Figure 6.4). See Figure 6.5 for completed log assembly.
Figure 6.3
Figure 6.4
Log Base (Top View)
3C
Numbered Logs
Heat & Glo LifeStyle Collection • Patio Campfi re • Rev B • 08/08
1A
1B
Log #1
2A
Log #2
3A
3B
Log #3
4A
4B
Log #4
Figure 6.5
1C
3C
4C
Completed Log Assembly
11
Advertisement
Table of Contents
