Monster Power Signature AVS 2000 Owner's Manual page 10

MONSTER SIGNATURE AVS2000 FEATURES
1. Digital "Output/Input Voltage" Meter: Indicates Output or Input voltage.
2. Digital "Voltage Correction" Meter: Indicates the amount of voltage being increased or decreased
in an effort to maintain a consistent 120 volts.
3. Digital "Current Usage" Meter: Indicates amperage draw.
4. "Ground OK" Indicator: Indicates the wall outlet that Monster Signature AVS 2000 is plugged into is properly grounded.
5. "Surge Protected" Indicator: Indicates Monster Signature AVS 2000's internal surge protection is active.
6. "Line and Neutral OK" Indicator: Indicates the wall outlet that Monster Signature AVS 2000 plugged
into is properly wired.
7. "Normal Voltage Condition" Indicator: Indicates input voltage is between 80 and 140 volts.
8. "Switched Outlets On" Indicator: Indicates components plugged into the "switched" outlets will receive power
when the ON button is pressed.
9. "Abnormal Voltage Condition" Indicator: Indicates input voltage has dropped below 80 volts or has risen
above 140 volts or that the system is waiting for stabilization.
10. "Sequential Power ON/OFF" Switch: Once the Automatic Voltage Stabilizer is plugged into a properly grounded
120 volts (nominal) outlet, pressing this button will provide AC power to the components plugged into the Automatic
Voltage Stabilizer's Switched and Switched (Timed) outlets. Pressing this button again will turn off the Switched
and Switched (Timed) outlets. (Unswitched outlets remain on at all times.)
5