Hardware Installation On A Pc - Zio CameraMate User Manual

Hardware Installation on a PC

You can connect your Hi-Speed Digital Media Reader/Writer to computers with
USB 1.1 or USB 2.0 ports.
After you install the Hi-Speed Digital Media Reader/Writer software (For
Windows 98SE only), you can install the hardware as follows. For Windows Me,
2000, and XP proceed to the steps below.
Connecting to a Computer's USB Port
Connect the USB connector on the Reader/Writer to the USB port on your
computer. You can connect the reader directly into the PC or use the optional
extension cable as shown in the picture below.
Note: Be sure the cable is properly aligned before; do not force the connection.
Connecting to a USB Hub
1. Connect the USB hub (purchased separately) to your computer's USB port.
2. Connect the Hi-Speed Digital Media Reader/Writer USB cable to a port on the
USB hub.
Note: Be sure the cable ends are properly aligned; do not force the connection.
CameraMate Hi-Speed Digital Media Reader/Writer 5