Alarm Recording - Swann DVR16-8600 User Manual
16 channel h.264 dvr
Hide thumbs
Also See for DVR16-8600:
- Specifications (2 pages) ,
- Specification sheet (2 pages) ,
- Easy setup manual (1 page)
Table of Contents
Advertisement
3.3.5 Alarm Recording
This unit supports recording channels and PTZ linking after alarm.
Enter ALARM configuration, see Fig 3.13 Sensor Alarm Setup. Select cameras
STEP1
Enable Detection first. Set Device type.
STEP2
Enter Trigger configuration. Set alarm out, recording cameras and linked PTZ, referring to 3.3.4 Motion
STEP3
Detection Recording STEP4-5
Set Alarm in hold time. It is the interval time between the two adjacent efficient alarms. This is similar with
STEP4
Hold time in MOTION configuration.
Set Alarm out hold time and Buzzer hold time. Click OK to save settings
STEP5
Enter SCHEDULE configuration. Select Sensor and relative cameras to set, referring to 3.3.3 Timer
STEP6
Recording.
Notice: About preset and auto cruise, users can only select one at same time.
The actual post alarm record time equals Hold time in RECORD and Hold time in MOTION
Digital Video Recorder User Manual
Fig 3.13 Sensor Alarm Setup
27
Advertisement
Table of Contents
