Table of Contents
Advertisement
Wall Control - WSK300
Control Specifi cations
Function - ON mode
Adjusting Flame Size
• Pressing the UP or DOWN
arrow while the
continuous display screen
is shown will display the
current fl ame size.
Note: Whenever the fi replace is turned on, the fl ame size will always be on HI for
75 seconds, then the control will set the fl ame to the programmed setting.
Wall Control
• Pressing UP or DOWN again
within 5 seconds will adjust
fl ame size:
= HI Flame
= LO Flame
8
MODE set to ON
Press up or down
arrows to turn
fl ame HI or LO
Advertisement
Table of Contents
