Charging The Battery - Roku 3M Streaming Projector User Manual

Charging the Battery

The rechargeable battery in the 3M Streaming Projector SPR1000 gives you up to two
hours of battery life while in ECO lamp mode. When the battery needs to be charged,
the status indicator LED starts flashing red. The battery should be fully charged before
using the projector for the first time.
Charge the battery:
1 Turn the projector power off.
2 Connect the power adapter to the projector's DC input.
3 Connect the other end of the power adapter to the electrical outlet.
4 The status indicator will change to amber while the battery is charging.
5 Allow three hours to fully charge the battery. When charging is complete, the
status indicator will flash green.
Battery Charging Notes:
• If the projector power is off, allow three hours for the battery to fully recharge. If
the projector power is on, the battery will take longer to charge.
• The battery has a lifespan and ages every time it is fully charged and discharged.
The battery will gradually lose charge capacity as it ages.
3M™ Streaming Projector SPR1000
22
© 2012 3M. All Rights Reserved.